1
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user of the
presence of uninsulated “dangerous voltage” witUUhin the product’s enclosure that may be sufficient
magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the appliance.
NOTE TO CATV SYSTEM INSTALLER: THIS REMINDER IS PROVIDED TO CALL THE CATV SYSTEM INSTALLER’S
ATTENTION TO ARTICLE 820-40 OF THE NEC THAT PROVIDES GUIDELINES FOR THE PROPER GROUNDING AND,
IN PARTICULAR, SPECIFIES THAT THE CABLE GROUND SHALL BE CONNECTED TO THE GROUNDING SYSTEM OF
THE BUILDING, AS CLOSE TO THE POINT OF CABLE ENTRY AS PRACTICAL.
CAUTION
CAUTION
RISK OF ELECTRIC SHOCK
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Portions of the advanced circuitry of this Media Center must continue to operate even when the
Media Center is turned off. Some of these circuits therefore need to be cooled at all times. A low
power standby fan may be heard in a quiet environment. This is normal operation.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
Hg
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING
TO LOCAL, STATE OR FEDERAL LAWS.
CAUTION
When mounting this product (LT-3280D or LT-3780D) to a wall or ceiling, only the specific 'Chief Manufacturing'
W
all Mount Kit PSM-2048 may be used. Use of any other wall mount kit may result in instability, causing
possible injury. Complete mounting instructions will be stated in the user manual for PSM-2048.
Wall Mount Kit Part # PSM-2048
Manufacturer’s name: Chief Manufacturing, Inc.
To order a PSM-2048 Wall Mount Kit, please call the Mitsubishi Parts Department at (800) 553-7278, or call
Chief Manufacturing at (800) 582-6480.
CAUTION: