Mitsubishi Electronics LT-3280 Flat Panel Television User Manual


 
Chapter 1: Product Overview
12
Remote Control Overview
Figure 1, following page
To send signals to the TV, point the remote control at
the display.
1. Slide Switch: Selects the A/V product to
be
controlled by the remote control. For NetCommand®
device control, select CABLE/DBS/DTV.
2. Numbers: Individually select channels or enter
information into menus.
3. SQV (SuperQuickView™): Scans through
memorized lists of favorite channels.
4. CHANNEL/PAGE: Scans up or down through
memorized channels. Pages up and down through
screens when used with TV Guide On Screen®,
ChannelView, a satellite receiver, or some cable
boxes.
5. DEVICE: Displays the Device Selection menu in
which you can select the device to view (ANT-1 and
ANT-2, or devices connected to the TV’s inputs,
including IEEE 1394 devices).
6. ADJUST: Press to navigate menus,
change settings, and move the PIP on-screen
location. Operates many NetCommand functions.
Navigate TV Guide On Screen® and change settings.
7. TV MENU: Displays the on-screen menu
system.
8. ENTER: Selects a channel number or menu item.
9. DEVICE MENU: Displays the menu for devices
connected to the TV, including CableCARD™. For
VCR or DVDs, the first press displays the transport
menu, the second press displays the VCR or DVD
menu. Displays and removes options menus for TV
Guide On Screen.
10. INFO: Press to display an on-screen summary of the
current device used and any broadcast information
available (including current V-Chip information). See
Appendix B for details.
While in the TV Guide On Screen, press repeatedly
to cycle through the available info box sizes.
11. V-CHIP: Turns the V-Chip Lock on or off.
12. PIP/POP: Turns on PIP and cycles through PIP and
POP display choices.
13. PIP CH: Scrolls up or down through memorized
channels for PIP
14. PIP DEVICE: Displays PIP Selection menu to select
the PIP or POP image source device
15. REC (Record): Displays the Record menu for
setting up recordings, such as recordings for a
DVCR or IEEE 1394 devices, or while in ChannelView.
Records with a VCR. Starts a recording when the
Listings screen for TV Guide On Screen is displayed.
16. REW/REV: Rewinds a VCR. Reverses scan with a
DVD, A/V Disc, or memory card file.
17. POWER: Turns power on and off for the TV and
other A/V products.
18. QV (QuickView™): Switches between the current
channel and last channel viewed.
19. SUB/CANCEL: Clears SQV and some menu entries,
and cancels recordings. For digital channels, adds
separator between main and sub-channel numbers.
20. VOLUME: Changes sound level.
21. MUTE: Turns sound on or off.
22. GUIDE: Displays or removes TV Guide On Screen
or ChannelView for ANT-1 and 2. Displays Track List
for A/V Disc. Displays program guide for satellite
receiver, or DVD Disc menu. Displays thumbnails or
playlists for memory card files.
23. Light: Located on the right side of the remote
control, this button illuminates buttons or labels when
pressed.
24. HOME: Exits TV on-screen menus and the TV Guide
On Screen system and returns to TV viewing.
25. AUDIO: Selects and adjusts individual audio
settings.
26. VIDEO: Selects and adjusts individual video settings.
27. EXCH: Exchanges PIP or POP and main TV picture.
28. SLEEP: Sets the TV to turn off within 2 hours. See
the next page for setup instructions.
29 CONNECT: Initiates IEEE 1394 peer-to-peer
connections.
30. FORMAT: Changes the shape and size of the main
TV picture. This feature is not availble when in PC
mode.
31. PAUSE: Pauses a live TV picture when no PIP or
POP image is displayed. When PIP image is visible,
pauses that image. Pauses a VCR, DVD, A/V Disc, or
memory card file.
32. PLAY: Plays a VCR, DVD, A/V Disc, or memory card
file.
33. FF/FWD: Fast forward a VCR or memory card file, or
fast play a DVD.
34. STOP: Stops play of a VCR, DVD, A/V Disc, or
memory card file.