Filter
Top Products
Chapter 4: IEEE 1394 Devices and NetCommand® Controlled Recordings
60
Using A/V Discs
An A/V Disc is an external hard drive that stores music,
picture and/or video files,
and is usually connected using
an IEEE 1394 cable.
A/V Disc Track List Screen
Figure 15
When viewing an A/V Disc, press GUIDE to display its
Track List. The Channel, Station, Date, Time, Program
name and whether it has been Watched (Y=yes, N=no)
will be displayed. Tracks will be listed in date and time
order and will vary in size.
Figure 15. A/V Disc Track List screen
Press ADJUST or to navigate through the Track List.
Press INFO to see the recording’s length and the amount
of memory it will use. Free disc space is displayed in
the upper right. If the broadcaster has sent detailed
information regarding the program, it will also display
when you press INFO. To play a track, select it on the
list, then press ENTER. To change pages, press CH
or . To delete a track, select it on the list and press
CANCEL. Press CANCEL again to confirm.
A/V Disc Search
NetCommand is able to search to a specific time in a
recording on an IEEE 1394 A/V Disc.
1. Start the desired track’s playback on the A/V disc.
2. Use the number buttons to enter the time code
position of hours followed by minutes. For example,
to enter one hour and twenty-two minutes (1:22) into
the track, enter 1, 2, 2.
3. Press ENTER to skip to the time code position.
4. To cancel the request or to start over, press CANCEL
instead of ENTER.
Using the Remote Control with an A/V Disc
After selecting from the Device Selection menu, you may
use the following remote control keys:
GUIDE: displays the Track List of recorded
programs.
PLAY: resumes playback of paused program.
PAUSE: pauses or resumes playback of program.
FF/FWD: forward picture search, multiple presses
increase the speed.
REW/REV: reverse picture search, multiple presses
increase the speed.
ADJUST : skip backward 12 seconds per press.
ADJUST : skip forward 30 seconds per press.
ADJUST : skip to the end of the track.
ADJUST : skip to the beginning of the track.
REC: Display the Record Menu to schedule
recordings