Filter
Top Products
RASFinder RF300E/RF310E User Guide
RF300E/RF310E122
Table of Contents
Section Description
D.1 AT Commands
D.1.1 Command Execution
D.1.2 General Information Commands
D.1.3 Network Configuration Commands
D.1.4 Serial Port Configuration Commands
D.1.5 General Configuration Commands
D.1.6 Digital (Data) Call Commands
D.1.7 Analog (Modem) Call Commands
D.2 S-Registers
D.3 Result Codes
D.4 Troubleshooting the TA Port
D.D.1 Specific Troubleshooting Situations
D.D.2 Debugging/Logging/Troubleshooting Commands
D.D.3 Debugging/Logging/Troubleshooting S-Registers
D.5 Test Commands
D.6 Factory Profiles
Table Section Description
D-1 D.1 AT Commands by Function
D-2 D.2 S-Register Summary
D-3 D.3 Result Codes
D-4 D.D.2 Debugging/Logging/Troubleshooting Command Summary
D-5 D.D.3 Debugging/Logging/Troubleshooting S-Register Summary
D-6 D.5 Test Command Summary
D.1 AT Commands
The TA’s command buffer can store 80 characters, including spaces and other characters used in
telephone numbers. If you mistype a command string, you can edit it by using the backspace or the
delete key, but only before you press <CR>. As you type a command string, it appears on your
monitor screen, letting you verify your input as you type it. D-1 lists the AT commands recognized by
the TA.
Table-1. AT Commands by Function (D.1.1)
AT Attention code
Return Command execution
+++AT<CR> In-band escape code
<BREAK>AT<CR> Out-of-band escape code
General Information Commands (D.1.2)
In Display Product Information
Ln List Active Profile Information
!L Display Network Configuration
>MIBn Management Information Block (MIB) Information
Network Configuration Commands (D.1.3)
%A97=n Dialing Method
>A0=n Type of Coding
!C0=n Network Switch Type
!C6=n Data SPID
*!C6=n Voice SPID