Filter
Top Products
Chapter 3 - Software Loading and Configuration
RF300E/RF310E 31
4. The Radius Setup dialog box is displayed.
5. Click RADIUS Enable to enable Radius security services for all ports on this RASFinder.
6. Click Accounting Enable if you want Radius to track accounting information such as login and
logout times, bytes sent and received, etc.
7. Leave Allow Call if Security Server Down unchecked (disabled) to prevent users from logging in if
the security servers are down.
8. Click Assign Remote Address Using RADIUS to enable the Radius Server to automatically assign
the IP Address of the WAN port on the RASFinder that the user will dial into.
9. Obtain the Shared Secret from the Radius network administrator. The Shared Secret must be the
same secret that is used on the Radius server whose address is being supplied for the Radius
primary server address entry.
10. Obtain the Radius server address from the Radius network administrator that will provide the security
to the RASFinder. The Radius server address is to be enterred in the RADIUS Primary Server
Address field.
11. If additional servers are being used as backup servers, obtain their address(es) from the Radius
network administrator and enter them in Backup Servers group. The first backup server address is
enterred in the Backup Server Address 1 field. Any additional backup server addresses are to be
enterred in the Backup Server Address 2 and Backup Server Address 3 fields.
12. A set of default attribute values will be displayed in the Attribute Values group. These default values
are used with the Multi-Tech Radius Server. You do not have to change these values if your
RASFinder is communicating with Multi-Tech’s Radius Server. If you are using another vendor’s
Radius Server to communicate with your RASFinder, you will have to communicate with your Radius
Server network administrator to see how he/she has set up these attribute values and then change
the default values to the values being used by that Radius server.
13. Click OK when you are finished.