Filter
Top Products
RASFinder RF300E/RF310E User Guide
RF300E/RF310E6
Introduction
Welcome to Multi-Tech's new RASFinder™, Models RF300E and RF310E, Remote Access Servers
(RAS) for connecting telecommuters and mobile users to a corporate LAN. Both models provide 56K
or ISDN remote server support for dial-out LAN users on IP or IPX networks and LAN security for
dial-in connections with user name and password protection and callback security.
The difference between the two models is the ISDN interface, model RF300E has the European and
rest of the world (ROW) interface (S/T-Interface), model RF310E has the North America interface (U-
Interface).
The RASFinder has three hybrid ISDN ports with six integrated V.90/56K modems for dial-in and dial-
out services, an Ethernet 10BaseT connection for local LAN users, and a command port for
configuration.
System management is provided through the command port using bundled Windows
®
based
software which provides easy-to-use configuration menus.
Figure 1-1. RASFinder Model RF300E/RF310E
Preview of this Guide
This guide describes the RASFinder and tells you how to install and configure the unit. The
information contained in each chapter is as follows:
Chapter 1 - Introduction and Description
Chapter 1 describes the new hybrid RASFinder. Descriptions of the front panel indicators and back
panel connectors are provided. A list of relevant specifications is provided at the end of the chapter.
Chapter 2 - Installation
This chapter provides information on unpacking and cabling your RASFinder. The installation
procedure describes each cable connection starting with connecting the power cord, Command port,
LAN and finally the WAN. The software installation process must be done through the Command
port.