Filter
Top Products
– 100 –
HD SDI output system phase: ±0.5H (1100 samples, 13.5 ns steps)
SD SDI Y output gain: –¶ to +3 dB
SD SDI P
B output gain: –¶ to +3 dB
SD SDI P
R output gain: –¶ to +3 dB
SD SDI Y black level: ±10%
SD SDI output system phase: ±0.5H (429 samples, 74ns steps)
Composite video output gain: –¶ to +3 dB
Composite chroma output gain: –¶ to +3 dB
Composite chroma phase: ±30°
Composite video output setup: ±14 IRE
Composite video output
system phase: ±0.5H (429 samples, 74ns steps)
Composite video output SC phase: ±180°
SD SDI and composite output
video phase: ±0.44H (380 samples, 74ns steps)
HD SDI output video phase: ±0.45H (1000 samples, 27ns steps)
AUDIO
Digital Audio
Sampling frequencies: 48 kHz (synchronous with video)
Quantizing: 16 bits
Frequency response: 20 Hz to 20 kHz ± 1.0 dB (at the reference level)
Dynamic range: Better than 90 dB (1 kHz, emphasis OFF)
Distortion: Less than 0.05% (1 kHz, emphasis OFF, reference level)
Crosstalk: Less than –80 dB (1 kHz, between 2 channels)
Wow & flutter: Below measurable limit
Headroom: 20 dB
Cue Track
Frequency response: 300 Hz to 6 kHz ± 3 dB
Audio Input Connector
Analog input
(CH1/CH2/CH3/CH4): XLR×4, 600Ω/high impedance selectable, +4/0/–20 dBu selectable
Digital input
(CH1/CH2, CH3/CH4,
CH5/CH6, CH7/CH8): BNC×4, AES/EBU format
Serial digital input: BNC×1, complies with SMPTE 292M
Cue track input: XLR×1, 600Ω/high impedance selectable, +4/0/–20/–60 dBu selectable
Audio Output Connector
Analog output
(CH1/CH2/CH3/CH4): XLR×4, low impedance, +4/0/–20 dBu selectable
Digital output
(CH1/CH2, CH3/CH4,
CH5/CH6, CH7/CH8): BNC×4, AES/EBU format
Serial digital output: BNC×3, complies with SMPTE 292M
Cue track output: XLR×1, low impedance, +4/0/–20 dBu selectable
Monitor output: XLR×2, low impedance, +4/0/–20 dBu selectable
Headphones: 1/4" phone jack, variable level, 8Ω
Other Input/Output Connectors
Time code input: XLR×1, 0.5 to 8 Vp-p, 10 kΩ
Time code output: XLR×1, low impedance, 2.0 Vp-p±0.5Vp-p
RS-422A input: D-sub 9-pin, RS-422A interface
RS-422A output: D-sub 9-pin, RS-422A interface
RS-232C: D-sub 25-pin, RS-232C interface
Parallel input/output: D-sub 50-pin
Encoder remote: D-sub 15-pin
Weight and dimensions when shown are approximate.
Specifications are subject to change without notice.
.
Specifications