Filter
Top Products
– 68 –
Setup menus
USER menu
<VIDEO> (continued)
Item Setting
No.
Superimposed
No.
Superimposed
Description
display display
624 DC ENH 0000 0dB
HV 0001 +3dB
0002 +6dB
625 UC ENH 0000 0dB
HV 0001 +3dB
0002 +6dB
650 Y LEVEL 0000 0000
::
4000 4000
::
5A70 5A70
651 PB LEVEL 0000 0000
::
4000 4000
::
5A70 5A70
652 PR LEVEL 0000 0000
::
4000 4000
::
5A70 5A70
653 BK LEVEL 0 –15.0%
::
150 0%
::
300 15.0%
672 V OUT 0000 THRU
SETUP 0001 ADD
(SD)*
1
673 EDH 0000 OFF
(SD)*
1
0001 ON
674 ESR MODE 0000 OFF
(SD)*
1
0001 AUTO
675 CCR MODE 0000 OFF
(SD)*
1
0001 ON
The underline on the setting item denotes the initial setting.
This selects the horizontal and vertical outline enhancement
during down-conversion.
This selects the horizontal and vertical outline enhancement
during up-conversion.
This is for adjusting the Y level (- to 0 dB to +3 dB).
dB=20 log (N/4000 hex)
This is for adjusting the PB level (- to 0 dB to +3 dB).
dB=20 log (N/4000 hex)
This is for adjusting the PR level (- to 0 dB to +3 dB).
dB=20 log (N/4000 hex)
This is for adjusting the black level.
This selects the composite output signal.
0: The signal is output with no setup added.
1: The signal is output with a 7.5% setup added.
This selects whether EDH is to be superimposed onto SERIAL
OUT.
0: EDH is not superimposed.
1: EDH is superimposed.
This selects the edge subcarrier reduction (ESR) operation
mode in the playback circuitry.
0: ESR is forcibly set to OFF.
1: ESR is automatically set to ON or OFF depending on the
VTR operation.
This selects the processing for cross color during playback.
0: The cross color is output as is.
1: The cross color can be reduced.
Setup menus
<Note>
Setup menu items
No.624 and 625 do not
work if the AJ-
UDC150P optional
board has not been
installed.
*
1
: With the SD output (SD tape playback or down-conversion output)