Filter
Top Products
– 46 –
Setup (default settings)
The unit’s major settings are performed by making selections on menus.
The setting menus appear on the TV monitor when the TV monitor and VIDEO OUT 3
connector in the unit’s connector area are hooked up.
Changing the settings
1
Press the MENU button.
The setup menu appears on the TV monitor and setup menu No. appears on the
counter display. (If the setup has already been performed, the screen showing the
changes made last will appear.)
2
Rotate the search dial and select the item to be set.
The cursor (*) on the menu screen moves and the item No. on the display flashes.
•
When the dial is rotated clockwise, the item No. is incremented from 001→002→
003→004 and so on; when it is rotated counterclockwise, the item No. is decremented.
•
The search dial should be used in jog mode if at all possible.
•
Hold down the PLAY button and press the FF (next major item) or REW (previous
major item) buttons to select the menu by major item.
3
While holding down the search button, rotate the search dial at the position where the
change is to be made.
The setting No. now flashes.
When the dial is rotated clockwise, the setting value is incremented; when it is rotated
counterclockwise, it is decremented.
4
Release the search button when the setting is completed.
The setting value on the menu screen and display flashes.
•
During the SHTL mode, the item moves if the search dial is not at the STILL position.
5
Repeat steps 2 through 4 to change another item.
6
Press the SET button.
The changes are now stored in the memory.
•
To return the items to the settings established before the changes were made, press
the MENU button.
To return the setup settings to the factory (default) settings, press the RESET button
while the menu is displayed. The following message will now appear:
SETUP-MENU INIT SET
YES<PLAY>/NO<STOP>
When the PLAY button is pressed, the factory settings are restored.
<Note>
•
When the RESET button is
pressed to return to the
factory settings, the factory
settings are restored only for
the user file currently being
used and other user files are
not affected.
•
The changed SYSTEM
menu contents are recorded
even if the MENU button is
pressed.
CH CONDITION ENTER ESCAPE SHIFT
ON
AUDIO CH SELECT
SHIFT ADJ
TC SET
START
TC/CTL
RESET
TC INT
TC
TAPE
UB
STAND BY
EDIT PLAY
REW STOP
SERVO
REC
FF
REC INHIBIT
PLAYER
EXT EE
MODE
REMOTE
PUSH
REV FWD
RECORDER
LOCAL
CONTROL
CH
1
1
ASMBL
PREVIEW
REVIEW
AUTO EDIT
PREROLL
SET UP
PROG
123
MENU
SAVE/
PROG MENU
MODE/SEL
MENU SET DIAG
EXIT
EXIT
TRIM
A
IN
IN
SET OUT
A
OUT
MULTICUE
INSERT
VIDEO
CH1/5 CH2/8 CH3/7 CH4/8 CUE TC
CH
4
OFF
POWER
METER
FULL/FINE
MONITOR SELECT
LEVEL
HEADPHONES
CH 1/5 CH 2/6 CH 3/7 CH 4/8 CUE
REC
L
R
PB
PULL FOR VARIABLE
PULL
OPEN
PULL
OPEN
CH
5
CH
8
2 3 4 5 6 7 8
JOG SHTL
SLOW
EJECT
M
-
cassette
/
ADAPTER
Caution: Do not insert S-cassette without adapter
STATUS
STATUS
1234
3
1
4
6
2