Filter
Top Products
– 99 –
Specifications
GENERAL
Power supply: AC 120 V, 50 – 60 Hz
Power consumption: 230 W
Operating ambient temperature: 41°F to 104°F (5°C to 40°C)
Operating ambient humidity: 10% to 90% (no condensation)
Weight: 44 lbs (20 kg)
Dimensions (W × H × D): 16-3/4" (max. 17-3/16" ) × 6-15/16" × 17-11/16"
(Not including the support legs, connectors, JOG dial and fan)
Recording format: DVCPRO HD
Recording video signal: 1080i, 59.94 Hz/60 Hz selectable
Recording audio signal: 48 kHz, 16 bits, 8 channels
Recording tracks: Digital video/audio: helical track
The time code is recorded in the sub-code area.
Cue track: 1 track
Control track: 1 track
Tape speed: 135.28 mm/sec
Recording time: 46 minutes (using the AJ-HP46LP)
32 minutes (using the AJ-HP32LP)
Tape: Metal tape
FF/REW time: Approx. 1 min (with AJ-HP46LP)
Search speed: ±50× speed (color)
Digital slow: Plus direction: 1× speed
Minus direction: –1× speed
Editing accuracy: ±0 frames (using the time code)
Tape timer accuracy: ±1 frame (using the continuous CTL signal)
Servo lock time: Less than 0.3 sec (standby ON)
Loading time: Approx. 3 sec
Audio split editing: YES
VIDEO
Sampling frequencies: Y: 74.25 MHz, PB/PR: 37.125 MHz
Quantizing: 8 bits
Video compression method: DCT + variable length code
Video compression rate: 1/6.7
Error correction: Reed-Solomon product code
Video recording bit rate: 100 Mbps
Sample × effective line: 1280 × 1080/frame
Video banwidth Y: 20 MHz
P
B/PR: 10 MHz
Video input connector
HD serial digital input: BNC×1, complies with SMPTE 292M standard
HD reference input: BNC×2, loop-through, 75Ω on/off
SD reference input: BNC×2, loop-through, 75Ω on/off
SDTI input (option): BNC×1, complies with SMPTE 305M/321M standard
Video Output Connector
HD serial digital output: BNC×3, complies with SMPTE 292M standard
OUT3 (superimpose on/off)
Serial digital component output: BNC×3, complies with SMPTE 259M-C/294M standard,
OUT3 (superimpose on/off)
HD reference output: BNC×1
SD reference output: BNC×1
Analog composite output: BNC×3, video 1, video 2 (WFM OUT), video 3 (superimpose on/off)
Output during SD playback or when the down-converter is installed
SDTI output (option): BNC×1, complies with SMPTE 305M/321M standard
Video Signal Adjustment
HD SDI Y output gain: –¶ to +3 dB
HD SDI P
B output gain: –¶ to +3 dB
HD SDI P
R output gain: –¶ to +3 dB
HD SDI Y black level: ±10%