Filter
Top Products
– 58 –
Setup menus
USER menu
<OPERATION> (continued)
Item Setting
No.
Superimposed
No.
Superimposed
Description
display display
113 REC INH 0000 OFF
0001 ON
114 REC INH 0000 LIGHT
LAMP 0001 FLASH
115 EJECT SW 0000 REC
INH 0001 OFF
The underline on the setting item denotes the initial setting.
This selects whether to allow or inhibit recording on the
cassette tape.
0: Recording on the tape is allowed when its accidental
erasure prevention tab has been set to the recording
enable position.
1: Recording on the tape is inhibited.
This selects whether to cause the REC INHIBIT lamp to flash
or light up when the cassette’s tab has been set to the
recording inhibit position.
0: The lamp lights.
1: The lamp flashes
<Note>
When “1” (ON) has been selected as the setup menu item
No.113 (REC INH) setting, the REC INHIBIT lamp lights all the
time regardless of this setting.
This selects whether to enable or disable the operation of the
eject button on the front panel.
0: The button’s operation is inhibited in the recording mode.
1: The button can be operated in any mode.
Setup menus