Panasonic AJ-HD150 VCR User Manual


 
– 52 –
Setup menus
SYSTEM menu
<SYSTEM> (continued)
Item Setting
No.
Superimposed
No.
Superimposed
Description
display display
15 VO SYS 0000 –429
H (SD)*
1
::
0429 0
::
0858 429
16 SDI SYS 0000 –429
H (SD)*
1
::
0429 0
::
0858 429
17 V PHASE 0000 –190
H (SD)*
1
::
0190 0
::
0380 190
18 SCH COAR 0000 0
H (SD)*
1
0001 90
0002 180
0003 270
19 SCH FINE 0000 –32
(SD)*
1
::
0032 0
::
0064 32
20 AV PHASE 0000 –100
::
0100 0
::
0200 100
30 MENU 0000 OFF
LOCK 0001 ON
The underline on the setting item denotes the initial setting.
*
1
: With the SD output (SD tape playback or down-conversion output)
This enables the system phase to be adjusted in 74ns steps.
-: The phase is advanced.
+: The phase is delayed.
<Note>
If setting
operation is performed, the setting value does not
return to factory (default) setting.
This enables the SDI OUT system phase to be adjusted in
74ns steps.
-: The phase is advanced.
+: The phase is delayed.
<Note>
If setting
operation is performed, the setting value does not
return to factory (default) setting.
This enables the video system phase to be adjusted in 148ns
steps.
-: The phase is advanced.
+: The phase is delayed.
<Note>
In the case of the SD down-converter output from the HD
playback tape (when the option has been installed), the video
phase is fixed.
This enables the SCH phase to be adjusted in 90-degree
steps.
-: The phase is advanced.
+: The phase is delayed.
(The SC phase changes but the H phase remains
unchanged.)
This enables the SCH phase to be adjusted in a total variable
range of +/-45 degrees or more.
-: The phase is advanced.
+: The phase is delayed.
(The SC phase changes but the H phase remains
unchanged.)
This enables the phase of the audio output to be adjusted to
the video output by 20.8us.
-: The audio output phase is moved ahead of the video output.
+: The audio output phase is delayed from the video output.
This selects whether to establish or release the system file
lock mode.
0: The system file lock is released (changes can be made).
1: The system files lock is engaged (no changes can be
made).
Video output signal adjustments
A control matrix of the sdjustments is shown below.
SYSTEM menu
10: ENCODER SEL
LOCAL
REMOTE
SYSTEM menu
11: SYS SC
LOCAL
REMOTE
LOCAL
REMOTE
SYSTEM menu
SYS SC
SYS H
Unit
Unit
External encoder
remote controller
SETUP menu
VIDEO LEVEL
CHROMA LEVEL
SET UP/HUE
Unit
External encoder
remote controller
Settings Item adjusted