16
RQT7394
Getting started
STEP 5
Setting up the Network
Preparation
≥Connect this unit to the Home Network. This can be directly to
another network compatible Panasonic DVD recorder
(➡ page 10).
≥Check the computer’s IP address setting (➡ page 18), if
connecting this unit and a computer when the DHCP on the
router is disabled.
1 Press [SETUP].
2 Press [3, 4] to select “Network” and
press [1].
3 Press [3, 4] to select “Network
Function” and press [ENTER].
4 Press [3, 4] to select “Enable” and
press [ENTER].
5 Press [3, 4] to select “TCP/IP
Settings” and press [ENTER].
6 Press [3, 4] to select “Automatic
(DHCP)” and press [ENTER].
When connecting a computer via a router with its DHCP
disabled
Press [3, 4] to select “Manual” and press [ENTER]
(➡ page 19, To manually enter the DVD recorder’s IP
Address).
7 Confirm that a connection has been
established.
Wait until the display changes (this may take a few minutes).
≥“Now connected to the network.” is displayed if the
connection has been correctly established.
≥“Cannot connect to the network.” is displayed if the
connection has failed. Check the LAN cable connection.
To exit the screen
Press [RETURN] several times.
To return to the previous screen
Press [RETURN].
[Note]
While “Now updating the settings. Please wait for a while.” is
displayed, no operations will be accepted by this unit. Wait about 5
seconds until the highlights appear again.
∫ To change unit names
When more than one network compatible Panasonic DVD recorder
is connected on the Home Network, you need to give each a
unique unit name so that they can be distinguished.
(Factory preset: “DVD Recorder”)
After step 2 (➡ left)
1 Press [3, 4] to select “Unit Name Setting” and press [ENTER].
2 Enter the name (➡ page 46).
This unit’s network setting
POWER
VOLUME
CH
INPUT SELECT
DVD POWER
TV
TV/VIDEO
1
HDD
SD/PC
DVD
23
456
78
0
9
CM SKIP
AUDIO
PAG E
CH
CANCEL
VCR Plus+
SKIP
STOP
PAU SE
PLAY/x1.3
SLOW/SEARCH
FUNCTIONS
ENTER
DIRECT NAVIGATOR
TOP MENU
RETURN
SUB MENU
CHAPTER
SETUP
Info
PROG/CHECK
TV GUIDE
REC MODEERASE
REC
STATUS
TIME SLIP
DISPLAY
DUBBING
3 4 2 1
ENTER
RETURN
SUB MENU
SETUP
¢ CANCEL
: 9
Numbered
buttons
SETUP
Disc
Video
Audio
Display
TV Screen
Channel
Set Up
Network Function
Enable
MAC Address
Unit ID
Status
Password
: 00-08-97-24-01-C4
: 4284 1491 6862 6641
: 0000-0000-20LU-3DDE
3900-0V03-0M52-0L00
: No password
Disable
Network
≥IP Address : Make a note of this IP address. You will
need it when operating this unit from the
computer.
SETUP
Disc
Video
Audio
Display
TV Screen
Channel
Set Up
TCP / IP Settings
Automatic (DHCP)
IP Address
Subnet Mask
Default Gateway
DNS Server
: 192
.
168
.
0
.
14
: 255
.
255
. 255.
0
: 192
.
168
.
0
.
1
: 192
.
168
.
0
.
1
Manual
Network
Audio
Display
TV Screen
Now connecting . . .
Network
7394en.book 16 ページ 2004年7月20日 火曜日 午後7時26分