Filter
Top Products
26
RQT7394
Recording
Timer recording
Refer to the control reference on page 25.
1 Press [PROG/CHECK].
2 Press [CHAPTER] (Green).
3 Enter the settings.
≥To enter the date
Press [3, 4] to select “Date” and press the numbered
buttons.
(Date: Month/Day/Year)
≥To enter the time
Press [3, 4] to select “Start Time” or “End Time” and press
the numbered buttons.
–You can set up to 8 hours.
–To change am/pm
Press [2, 1] to select “am” or “pm” and press [DUBBING]
(Blue).
≥To enter the channel
Press [3, 4] to select “Channel” and press the numbered
buttons.
–To select the input channel (L1/L2/L3/DV)
Press [DUBBING] (Blue).
≥To change the recording mode
Press [3, 4] to select “Quality” and press [DUBBING]
(Blue).
Each time you press the button:
≥To change the recording drive
Press [3, 4] to select “Destination” and press [DUBBING]
(Blue).
Each time you press the button:
HDD ,-. DVD
When the recording drive is “DVD” and there is not enough
remaining space, recording automatically switches to the
“HDD” (➡ page 27, Relief Recording).
4 Press [ENTER].
≥Press [CHAPTER] (Green) to change recording frequency.
Each time you press the button:
≥To program other recordings
Press [3, 4, 2, 1] to select “RECORD” and repeat steps
2–4.
5 Press [TV GUIDE].
Returns to the television screen.
≥The unit is not off. To save power, turn the unit off by
pressing [Í DVD POWER].
≥When using the cable TV box, make sure the cable TV box is
turned on.
Notes on timer recording ➡ page 27
∫ To cancel recording when recording has already
begun
Press [∫], then [ENTER] within 5 seconds.
≥You can also press and hold [∫] on the main unit for more than 3
seconds to stop recording.
Entering PlusCode
®
number is an easy way of timer recording. You
can find them in TV listings in newspapers and magazines.
≥You can enter up to 8 days in advance.
≥VCR Plusi system works only after this unit downloads the
television program list (➡ page 12).
1 Press [VCR Plusr].
2 Press [3, 4] to select “PlusCode”.
3 Press the numbered buttons to enter
the PlusCode number.
≥To correct the number
Press [3] and press [4]. Enter the number again from the
beginning.
Manually programming timer
recordings
LP # EP # FR # XP # SP
^==============}
FAVORITES
Sat 2:00pm Dodzilla Once
Sat 3:00pm Bull house Weekly
Sat 3:30pm Be switched Weekly
Sat 4:00pm Baseball Once
LISTINGSMESSAGES SCHEDULE
SET TIMER
R
R
W
R
W
R
RECORD
Date :
Start Time :
End Time :
Channel :
Quality :
Destination :
PlusCode :
4 / 1 / 04
8 : 00 pm
10 : 00 pm
56
SP
HDD
=========
[.
l
l
l
l
l
l
{
Records only once.
;
Records weekly.
;
Records daily (From Monday to Friday).
;
Temporarily cancels the program timer
recording without deleting the program setting.
Using VCR Plusi system to make timer
recordings
FAVORITES
Sat 2:00pm Dodzilla Once
Sat 1:00pm NWBG Once
Sat 3:00pm Bull house Weekly
Sat 3:30pm Be switched Weekly
4/3
4:00pm Baseball Once
LISTINGSMESSAGES SCHEDULE
RECORD
REMOVE
FREQUENCY
INFO.
87
NWBG
SP
HDD
R
R
R
W
R
W
R
1:00 1:55
R
R
W
R
D
R
Date :
Start Time :
End Time :
Channel :
Quality :
Destination :
PlusCode :
4 / 1 / 04
8 : 00 pm
10 : 00 pm
56
SP
HDD
=========
7394en.book 26 ページ ２００４年７月２０日 火曜日 午後７時２６分