Filter
Top Products
53
RQT7394
Transfer (Dubbing)
∫ To register on a folder by folder basis
1 Press [3, 4] to select “Picture/Folder” and press
[ENTER].
2 Press [3, 4] to select “Folder” and press [ENTER].
3
Press [
3
,
4
] to select “New entry” and press [ENTER].
4 Press [3, 4] to select the folder and press [ENTER].
≥To select a multiple number of items together, press [;]
to add the check mark and press [ENTER] (➡ below,
Multiple editing).
≥To show other pages (➡ below)
≥To switch another higher folder (➡ below)
≥To edit the transferring (dubbing) list (· below)
6 Press [3, 4] to select “SET” and
press [ENTER].
The transferring (dubbing) list is registered.
7 Press [3, 4] to select “Start
dubbing” and press [ENTER].
≥For individual still pictures only
When specifying another folder as the transferring (dubbing)
destination, select “Folder”.
Press [2, 1] to select “Yes” and press [ENTER] to start
transferring (dubbing).
To stop transferring (dubbing)
Press and hold [RETURN] for 3 seconds.
To return to the previous screen
Press [RETURN].
∫ To select another folder
1 Press [3, 4, 2, 1] to select “Folder” and press [ENTER].
2 Press [3, 4] to select the folder and press [ENTER].
≥The still pictures of different folders cannot be registered on the
same list.
≥If there is a multiple number of higher
folders recognizable, you can switch
them using [2, 1]. (Folders whose
higher folders are different cannot be registered on the same list.)
∫ To edit the transferring (dubbing) list
Select the item in step 5 (➡ page 52, right column)
1 Press [SUB MENU].
2 Press [3, 4] to select the operation and press
[ENTER].
§
Multiple editing is possible (➡ below).
To cancel all registered transferring (dubbing) settings and lists
In step 3 (➡ page 52, right column)
1 Press [3, 4] to select “Cancel all” and press [ENTER].
2 Press [2, 1] to select “Yes” and press [ENTER].
≥The settings and lists may be cancelled in the following situations.
–When a title or still picture has been recorded or erased at the
transfer (dubbing) source
–When steps have been taken, for instance, to turn off the unit,
remove the card, open the tray, change the transfer (dubbing)
direction, etc.
[SD]
or
[PC]
>
[HDD]
or
[RAM]
Preparation
Press [SD/PC] to select the source drive.
1 While stopped
Press [FUNCTIONS].
2 Press [3, 4, 2, 1] to select “COPY
ALL PICTURES” and press [ENTER].
≥If there is a multiple number of higher folders recognizable,
you can switch them using [2, 1].
3 Press [3, 4] to select “Copy from”
and press [2, 1] to select the drive.
4 Press [3, 4] to select “Copy to” and
press [2, 1] to select the drive.
5 Press [3, 4, 2, 1] to select “Copy”
and press [ENTER].
To stop transferring (dubbing)
Press and hold [RETURN] for 3 seconds.
To return to the previous screen
Press [RETURN].
To show other pages
Press [3, 4, 2, 1] to select “Previous” or “Next” and press
[ENTER].
≥You can also press [:, 9] to show other pages.
Multiple editing
Select with [3, 4, 2, 1] and press [;]. (Repeat.)
Press [ENTER] to register to the list.
≥A check mark appears. Press [;] again to cancel.
Dubbing
Create a dubbing list.
Current capacity 4343MB
No. Size
New entry
1
2
Cancel all
Picture
Dubbing direction
Mode
Picture/Folder
SD card > DVD
Picture
High Speed
Name
Folder
Make a new folder and dub to it?
New folder
\DCIM
001 100__DVD
002 101__DVD
003 102__DVD
---
\DCIM\100__DVD
004 103__DVD
Create list Select pictures
SD CARD
0001
Folder 103__DVD
0002 0003 0004
\DCIM
001 100__DVD
002 101__DVD
003 102__DVD
---
\DCIM\100__DVD
004 103__DVD
002 101__DVD
003 102 DVD
\DCIM\100__DVD
\DCIM
001 100__DVD
Add
Erase
§
Erase all
Transferring (dubbing) all the still
pictures on a card—COPY ALL
PICTURES
[Note]
≥When transferring (dubbing) the still pictures on a folder by
folder or card by card basis, files other than the still picture files
inside the folder will also be transferred (dubbed). (This does
not apply to the lower folders contained inside the folders.)
≥If still pictures are already contained inside the transfer
(dubbing) destination folder, the new still pictures are recorded
following the existing still pictures.
≥If the space on the destination drive runs out or the number of
files/folders to be transferred (dubbed) exceeds the maximum
(➡ page 34), transferring (dubbing) will stop partway through.
≥When a name has not been input for the transfer (dubbing)
source folder, it is possible that this folder’s number will not be
the same on the transfer (dubbing) destination. It is
recommended that you input a folder name before transferring
(dubbing) (➡ page 46).
≥Print number setting (DPOF) is not transferred (dubbed).
≥The sequence in which the still pictures are registered on the
transfer (dubbing) list may not be the same at the transfer
(dubbing) destination.
Copy All Pictures (JPEG)
Copy from
SD card
\DCIM
Copy to
HDD
\JPEG\DCIM001
Copy all pictures (JPEG) in the card
7394en.book 53 ページ ２００４年７月２０日 火曜日 午後７時２６分