Panasonic DMR-E500H DVD Recorder User Manual


 
59
RQT7394
Convenient functions
[HDD] [RAM] [SD]
Preparation
Press [HDD], [DVD] or [SD/PC] to select the drive.
Release protection ( page 58).
1 While stopped
Press [FUNCTIONS].
2 Press [3, 4, 2, 1] to select “DISC
SETTING” or “CARD SETTING” and
press [ENTER].
3 Press [3, 4] to select “Erase all
titles” or “Erase all titles (MPEG4)”
and press [ENTER].
4 Press [2, 1] to select “Yes” and
press [ENTER].
5 Press [2, 1] to select “Start” and
press [ENTER].
A message appears when finished.
6 Press [ENTER].
[Note]
Once erased, the recorded contents are lost and cannot be
restored. Make certain before proceeding.
Erasing all video titles will result in all play lists also being erased.
Still picture data (JPEG, TIFF) or computer data cannot be erased.
With MPEG4, files that are not compatible with this unit may be
erased.
Erase does not work if one or more titles are protected.
To exit the screen
Press [RETURN] several times.
To return to the previous screen
Press [RETURN].
[HDD] [RAM] [SD] [PC]
Preparation
Press [HDD], [DVD] or [SD/PC] to select the drive.
Release protection ( page 58).
1 While stopped
Press [FUNCTIONS].
2 Press [3, 4, 2, 1] to select “DISC
SETTING” or “CARD SETTING” and
press [ENTER].
3 Press [3, 4] to select “Format” or
“Format disc” and press [ENTER].
4 Press [2, 1] to select “Yes” and
press [ENTER].
5 Press [2, 1] to select “Start” and
press [ENTER].
A message appears when formatting is finished.
6 Press [ENTER].
[Note]
To stop formatting [RAM]
Press [RETURN].
(You can cancel formatting if it takes more than 2 minutes. The disc
must be reformatted if you do this.)
Formatting cannot be performed on DVD-R or CD-R/RW.
When a disc or card has been formatted using this unit, it may not
be possible to use it on any other equipment.
You cannot format a Microdrive or mobile hard disk on this unit.
To exit the screen
Press [RETURN] several times.
To return to the previous screen
Press [RETURN].
Erasing all titles, play lists and MPEG4
titles—Erase all titles
Erasing all the contents of a disc or
card—Format
Formatting erases all contents (including computer data),
and it cannot be restored. Check carefully before
proceeding. The contents are erased when you format it even if
you have set protection.
Do not disconnect the AC power supply cord while
formatting. This can render the disc unusable.
Formatting normally takes a few minutes, however it may take up
to a maximum of 70 minutes ([RAM]).
7394en.book 59 ページ 2004年7月20日 火曜日 午後7時26分