Panasonic DMR-E500H DVD Recorder User Manual


 
35
RQT7394
Playing back
[HDD] [RAM] [SD] [PC]
1 Press [HDD], [DVD] or [SD/PC] to
select the drive.
Each time you press [SD/PC]:
SD card drive ,". PC card drive
On the main unit, press
[DRIVE SELECT] several times.
The indicator lights up on the unit.
2 Press [DIRECT NAVIGATOR].
3 Press [3, 4, 2, 1] to select
“PICTURE” tab and press [ENTER].
4 Press [3, 4, 2, 1] to select the still
picture and press [ENTER].
You can also select still pictures with the numbered buttons.
Press [2, 1] to display the previous or next still picture.
Useful functions during still picture play ( below).
To stop playing
Press []
To exit the screen
Press [DIRECT NAVIGATOR].
To show the picture properties
Press [STATUS] twice.
To exit the picture properties screen
Press [STATUS].
[Note]
Still pictures cannot be played during recording or transferring
(dubbing).
Direct Navigator screen icons
[HDD] [RAM] [SD] [PC]
e.g.,
5: [0] [0] [0] [5] 115: [0] [1] [1] [5]
15: [0] [0] [1] [5] 1115: [1] [1] [1] [5]
e.g., SD card drive
Select
Previous 001/001 Next
SUB MENU
Play
0001
Folder 100__DVD
0002 0003 0004
0005 0006 0007 0008
0009
---- ---- ----
DIRECT NAVIGATOR Picture (JPEG) View
SD CARD
MPEG4
PICTURE
Picture (JPEG) View
screen
To select the still pictures in another folder
( page 21, Structure of folders displayed by this unit)
1 Press [3, 4, 2, 1] to select “Folder” and press
[ENTER].
2 Press [3, 4] to select the folder and press [ENTER].
You can also select folders with the numbered buttons.
e.g., 5: [0] [0] [5]
15: [0] [1] [5]
115: [1] [1] [5]
If there is a multiple number of higher folders recognizable,
you can switch them using [2, 1].
Picture protected.
Picture in which the number of prints is set (DPOF)
( page 44, 68).
0001
Folder 103__DVD
0002 0003 0004
0005 0006 0007 0008
\DCIM
002 101__DVD
003
102__DVD
---
\DCIM\100__DVD
---
004 103__DVD
001 100__DVD
DIRECT NAVIGATOR Picture (JPEG) View
SD CARD
MPEG4
PICTURE
002 101__DVD
003 102 DVD
\DCIM\100__DVD
\DCIM
001 100__DVD
11 / 10 6:53 PM
Folder - Picture No. 102 - 0001
Date 11 / 12 / 2003
No. 3 / 9
Shooting date
Useful functions during still picture play
Start Slide Show
Slide Interval
You can display still pictures one by one with constant interval.
While the Picture (JPEG) View screen is displayed
1 Press [SUB MENU].
2Press [3, 4] to select “Start Slide Show” and press
[ENTER].
To change the display timing
1 Press [3, 4] to select “Slide Interval” in step 2 and press [ENTER].
2 Press [2, 1] to select the desired timing (0–30 seconds) and press [ENTER].
Rotate
1 Press [SUB MENU].
2Press [3, 4] to select “Rotate RIGHT” or “Rotate LEFT”
and press [ENTER].
Rotation information will not be stored.
Zoom in
Zoom out
(Only for a still picture with a low
pixel count)
1 Press [SUB MENU].
2Press [3, 4] to select “Zoom in” and press [ENTER].
To return the picture to its original size, press [3, 4] to select “Zoom out” in step 2
and press [ENTER].
When zooming in, the picture may be cut off.
The enlargement information will not be stored.
Erase
1Press [ERASE].
2Press [2, 1] to select “Erase” and press [ENTER].
Once erased, the recorded contents are lost and cannot be restored. Make certain before
proceeding.
Set up Protection
Cancel Protection
Start Slide Show
Slide Interval
DPOF
Erase Picture
Rotate LEFT
Rotate RIGHT
Zoom in
Rotate LEFT
Rotate RIGHT
7394en.book 35 ページ 2004年7月20日 火曜日 午後7時26分