Filter
Top Products
52
RQT7394
Transfer (Dubbing)
Recording from a video cassette recorder
Refer to the control reference on page 51.
[HDD] [RAM]
When the “DV AUTO REC” function is used, programs are recorded
as a title while at the same time chapters are created at each break
in the images and the play list is created automatically.
Preparation
1 Turn off the main unit and DV equipment, then connect the
equipment with the unit’s DV input terminal (➡ page 51,
left column).
2 Turn on the main unit and DV equipment.
3 Pause play of the DV equipment at the point you want recording
to start.
4 Press [HDD] or [DVD] to select the recording drive.
1 While stopped
Press [FUNCTIONS].
2 Press [3, 4, 2, 1] to select “DV
AUTO REC” and press [ENTER].
3 Press [REC MODE] to select the
recording mode.
4 Press [2, 1] to select “Rec” and
press [ENTER].
Recording starts.
When recording finishes
The confirmation screen appears. Press [ENTER] to finish DV
automatic recording.
To stop recording
Press [∫].
[Note]
≥Only one piece of DV equipment (e.g., digital video camcorder) can
be connected to the unit via the DV input terminal.
≥
It is not possible to operate the unit from the connected DV equipment.
≥The DV input on this unit is for use with DV equipment only. (It
cannot be connected to a computer, etc.)
≥The DV equipment name may not be shown correctly.
≥Depending on the DV equipment, the images or audio may not be
input properly.
≥The date and time information on the tape of the DV equipment will
not be recorded.
≥You cannot record and play simultaneously.
≥Even if you set the simultaneous MPEG4 recording function
(➡ page 22), MPEG4 recording will not take place.
DV automatic recording (DV AUTO REC)
If the DV automatic recording function does not work properly,
check the connections and DV equipment settings, and turn the
unit off and back on.
If that does not work, follow the instructions for manual
recording (➡ page 51).
Transferring (dubbing) still pictures
[HDD] [RAM] [SD] [PC]
1 While stopped
Press [FUNCTIONS].
2 Press [3, 4, 2, 1] to select
“DUBBING” and press [ENTER].
If you are not going to change the registered list press [4]
several times (➡ page 53, step 7).
3 Press [3, 4] to select “Dubbing
direction” and press [1].
1 Press [3, 4] to select “Source” and press [ENTER].
2 Press [3, 4] to select the drive and press [ENTER].
3
Press [
3
, 4]
to select “Destination” and press [ENTER].
4 Press [3, 4] to select the drive and press [ENTER].
The same drive as the transfer (dubbing) source can be
selected.
5 Press [2] to confirm.
4 Press [3, 4] to select “Mode” and
press [1].
1
Press
[3, 4] to select “Format” and press [ENTER]
.
2
Press
[3, 4] to select “Picture” and press [ENTER]
.
“Recording mode” is automatically set to “High speed”.
3 Press [2] to confirm.
5 Press [3, 4] to select “Create list”
and press [1].
Select the transferring (dubbing) items and register on the list.
Still pictures and folders cannot be registered on the same list.
∫ To register individual still pictures
1
Press [
3
, 4]
to select “New entry” and press [ENTER].
2 Press [3, 4, 2, 1] to select a still picture and press
[ENTER].
≥To select a multiple number of items together, press [;]
to add the check mark and press [ENTER] (· page 53,
Multiple editing)
≥To show other pages (➡ page 53)
≥To select the still pictures in another folder (➡ page 53)
≥To edit the transferring (dubbing) list (· page 53)
Transferring (dubbing) using the
transferring (dubbing) list
1
HDD
SD/PC
DVD
23
456
78
0
9
CM SKIP
AUDIO
PAG E
CH
CANCEL
VCR Plus+
SKIP
STOP
PAUSE
PLAY/x1.3
SLOW/SEARCH
FUNCTIONS
ENTER
DIRECT NAVIGATOR
TOP MENU
RETURN
SUB MENU
PROG/CHECK
TV GUIDE
TIME SLIP
DISPLAY
RETURN
SD/PC
FUNCTION
SUB MENU
;
3 4 2 1
ENTER
: 9
Dubbing
SD card
HDD
Select the dubbing direction.
1
2
3
Source
Destination
Cancel all
Dubbing direction
Mode
Create list
SD card > HDD
Picture
High Speed
0
01/01
Dubbing
Create a dubbing list.
Current capacity 4343MB
No. Size
Previous
New entry
Next
SET
1
2
3
Cancel all
Picture
Dubbing direction
Mode
Create list
Picture/Folder
Start dubbing
SD card > DVD
Picture
High Speed
Name
7394en.book 52 ページ ２００４年７月２０日 火曜日 午後７時２６分