Filter
Top Products
Setting up
ENGLISH - 15
Setting up
Cautions when setting up the interface box
z
When mounting the interface box to a rack or a table underside, use the supplied rack/table underside
mounting bracket or the rack mounting bracket.
z
Use a torque screwdriver or torque wrench to tighten bolts to their specied tightening torques. Do not
use tools such as electric screwdrivers or impact screwdrivers. Tightening screws with over their specied
tightening torques will damage mount screw holes, failing to mount the interface box using brackets.
Right side
Left side
Rack mount screw hole
Table underside mount screw hole
Torque: 0.8 ± 0.2 N·m
Supplied screws: Flat-head Phillips screw (M3)
Mounting on the rack
1) Attach the supplied rack mounting bracket.
z
Fix the rack mounting bracket to the rack mount screw holes on both sides of the interface box with
supplied at-head Phillips screws (3 pcs). Securely tighten the screws.
Rack mounting bracket
Rack mount
screw hole
Rack/table underside mounting bracket
2) Attach the supplied rack/table underside mounting bracket.
z
Fix the rack mounting bracket to the rack mount screw holes on the both sides of the interface box with
supplied at-head Phillips screws (3 pcs).