Filter
Top Products
Technical information
ENGLISH - 49
Mode
Signal name
display
Resolution
(Dots)
Scanning
frequency
Dot clock
Frequency
(MHz)
Format
*1
Plug and play
compatible
Horizontal
(kHz)
Vertical
(Hz)
COMPUTER
1/2
HDMI
1/2
SXGA SXGA60 1 280 x 1 024 64.0 60.0 108.0 R/H
3 3
SXGA75 1 280 x 1 024 80.0 75.0 135.0 R/H
3 3
SXGA85 1 280 x 1 024 91.1 85.0 157.5 R/H ― ―
SXGA+ SXGA+60 1 400 x 1 050 65.2 60.0 122.6 R/H ― ―
SXGA+60 1 400 x 1 050 65.3 60.0 121.8 R/H
3 3
SXGA+75 1 400 x 1 050 82.2 75.0 155.9 R/H ― ―
WXGA+ WXGA+60 1 440 x 900 55.9 59.9 106.5 R/H ― ―
UXGA UXGA60 1 600 x 1 200 75.0 60.0 162.0 R/H
3 3
WSXGA+ WSXGA+60 1 680 x 1 050 65.3 60.0 146.3 R/H ― ―
1920 x 1080 1920x1080/60 1 920 x 1 080
*2
66.6 59.9 138.5 R/H ― ―
WUXGA WUXGA60RB 1 920 x 1 200
*2
74.0 60.0 154.0 R/H
3 3
*1: Signals that show formats are as follows.
V: Video
S: S-video
R: RGB
Y: YC
B
C
R
/YP
B
P
R
H: HDMI
*2: VESA CVT-RB (Reduced Blanking) compatible.
Note
z
The “i” at the end of the resolution indicates an interlaced signal.
z
When interlaced signals are connected, ickering may occur on the projected image.
Corresponding 3D signals list
The 3D signals corresponding to the interface box are the HDMI signals in the following table.
z
When the 3D signal is input while a projector that does not correspond to the 3D is connected, the icon that
indicates the 3D image can not be output is displayed, and the image disappears. In this case, change the
input signal to the 2D.
Mode
Format of the 3D image signal
Frame packing Side by side Top and bottom
750 (720)/60p
3
*1
3 3
*1
750 (720)/50p
3
*1
3 3
*1
1125 (1080)/60i
—
3
*1
—
1125 (1080)/50i
—
3
*1
—
1125 (1080)/24p
3
*1
3 3
*1
1125 (1080)/60p
—
3 3
1125 (1080)/50p
—
3 3
*1: HDMI standard 3D Mandatory format signal.