Panasonic ETYFB100G Cable Box User Manual


 
Read this rst!
ENGLISH - 3
Read this rst!
Information
WARNING: THIS APPARATUS MUST BE EARTHED.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DONOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
WARNING:
1. Remove the plug from the mains socket when this unit is not in use for a prolonged period of time.
2. To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualied
service personnel.
3. Do not remove the earthing pin on the mains plug. This apparatus is equipped with a three prong
earthingtype mains plug. This plug will only t an earthing-type mains socket. This is a safety feature. If you
are unable to insert the plug into the mains socket, contact an electrician. Do not defeat the purpose of the
earthing plug.
Power Supply: This equipment is designed to operate on 100 V - 240 V, 50 Hz/60 Hz AC, house current only.
CAUTION: The AC power cord (for USA) which is supplied with the equipment as an accessory can only
be used for power supplies up to 125 V. If you need to use higher voltages than this, you will
need to obtain a separate 250 V power cord. If you use the accessory cord in such situations,
re may result.
CAUTION: To assure continued compliance, follow the attached installation instructions, which include
using the provided power cord and shielded interface cables when connecting to computer
or peripheral device. If you use serial port to connect PC for external control of projector, you
must use a commercial RS-232C serial interface cable with ferrite core. Any unauthorized
changes or modications to this equipment will void the user’s authority to operate.
CAUTION (USA and Canada)
CAUTION: This equipment is equipped with a three-pin grounding-type power
plug. Do not remove the grounding pin on the power plug. This plug
will only t a grounding-type power outlet. This is a safety feature. If
you are unable to insert the plug into the outlet, contact an electrician.
Do not defeat the purpose of the grounding plug.
Do not remove
WARNING (USA and Canada)
z
Not for use in a computer room as dened in the Standard for the Protection of Electronic Computer/Data
Processing Equipment, ANSI/NFPA 75.
z
For permanently connected equipment, a readily accessible disconnect device shall be incorporated in the
building installation wiring.
z
For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily
accessible.