Panasonic ETYFB100G Cable Box User Manual


 
About your interface box
14 - ENGLISH
Connecting terminals
(1) (2) (4)(3)
(7) (11)(8) (9) (10)(6)
(5)
(1) <REMOTE IN> terminal
Terminal to remotely operate the interface box via the
external control circuit.
(2) <SERIAL IN> terminal
The RS-232C compatible terminal used for the external
control.
The projector connected by the DIGITAL LINK can be
externally controlled. Controlling the interface box is
disabled.
(3) <VIDEO IN> terminal
This is a terminal to input video signals.
(4) <S-VIDEO IN> terminal
This is a terminal to input S-video signals.
(5) <HDMI IN 1>/ <HDMI IN 2> terminal
This is a terminal to input HDMI signals.
(6) <DC IN> terminal
Connects the supplied AC adaptor.
(7) <DIGITAL LINK> terminal
Connects to the DIGITAL LINK
*1
compatible projector or
the preferred twisted-pair-cable receiver by using the cable
of CAT5e or the higher grade (
page 21).
*1: DIGITAL LINK is the technique that transfers the
image, sound, ethernet, and serial control signals
via the twisted-pair-cable. The interface box can be
connected to the projector compatible to DIGITAL
LINK or the twisted-pair-cable receiver. For twisted-
pair-cable receivers of other manufacturers of which
the operation has been veried with the DIGITAL LINK
compatible projector and the digital interface box,
refer to Panasonic website (http://panasonic.net/avc/
projector/).
Note that the verication for devices of other
manufacturers has been made for the items
set by Panasonic Corporation, and not all the
operations have been veried. For operation or
performance problems caused by the devices of other
manufacturers, contact the respective manufacturers.
(8) <LAN> terminal
Terminal to connect to the network.
The projector connected by the DIGITAL LINK can be
controlled from the computer connected to this terminal.
(9) <AUDIO IN> terminal
Terminal to input the sound signals.
(10) <AUDIO OUT> terminal
Terminal to output the sound signal that is input to the
interface box.
(11) <COMPUTER 1 IN>/ <COMPUTER 2 IN> terminal
Terminal to input the RGB signal from the computer or the
YC
B
C
R
/YP
B
P
R
signals.
Attention
z
Wire the LAN cable, which is directly connected to the interface box, only indoors.