Filter
Top Products
Technical information
46 - ENGLISH
■
Communication conditions
Signal level RS-232C-compliant Character length 8 bit
Sync. method Asynchronous Stop bit 1 bit
Baud rate 9 600 bps X parameter None
Parity None S parameter None
■
Cable specication
z
When connected to a computer
Interface box
(<SERIAL IN> terminal)
1 NC NC 1
Computer
(DTE specications)
2 2
3 3
4 NC NC 4
5 5
6 NC NC 6
7 7
8 8
9 NC NC 9
■
Control commands
When controlling the projector from a computer, the following commands are available:
[Projector control command]
Command Control contents Parameter Remarks
IIS INPUT selection
DL1:VID
DL1:SVD
DL1:PC1
DL1:PC2
DL1:HD1
DL1:HD2
VIDEO
S-VIDEO
COMPUTER1
COMPUTER2
HDMI1
HDMI2
Note
z
The control commands are available only when the DIGITAL LINK compatible projector is connected.
z
For the control commands of the connected projector, refer to the Operating Instructions of the projector used.