[PICTURE] menu
30 - ENGLISH
Select [PICTURE] from the main menu, and
select the item from the sub-menu.
Refer to “Navigating through the menu”
(
page 27) for the operation of the menu
screen.
[SYSTEM SELECTOR]
The interface box will automatically detect the input
signal, but you can set the system method manually
when an unstable signal is input. Set the system
method matching the input signal.
1) Press
to select [SYSTEM
SELECTOR].
2) Press
or the <ENTER> button.
z
The [SYSTEM SELECTOR] individual
adjustment screen is displayed.
3) Press
to switch [SYSTEM
SELECTOR].
■
When using <VIDEO IN> terminal,
or <S-VIDEO IN> terminal
Select [AUTO], [NTSC], [NTSC4.43], [PAL], [PAL-M],
[PAL-N], [SECAM], or [PAL60].
Attention
z
Set it to [AUTO] normally.
z
Switch the setting to the signal method for the TV
used.
Note
z
Setting [AUTO] will automatically select [NTSC],
[NTSC4.43], [PAL], [PAL-M], [PAL-N], [SECAM], or
[PAL60].
■
When using <COMPUTER 1 IN>
terminal, or <COMPUTER 2 IN>
terminal
z
During 480i, 576i, or 576p signal input
Select from [AUTO], [RGB], or [YC
B
C
R
].
z
During VGA60 or 480p signal input
Select from [AUTO], [VGA60], [480p], or [480pRGB].
z
When using other movie based input
signals
Select from [AUTO], [RGB], or [YP
B
P
R
].
Note
z
Refer to “List of compatible signals” (
page 48) for
compatible signals.
■
When using <HDMI IN 1>
terminal, or <HDMI IN 2> terminal
z
During 480i, 576i, 480p, or 576p signal
input
Select from [AUTO], [RGB], or [YC
B
C
R
].
z
When using other movie based input
signals
Select from [AUTO], [RGB], or [YP
B
P
R
].
Note
z
Refer to “List of compatible signals” (
page 48) for
compatible signals.
z
This may not function properly for some external
devices that are connected.
[CLAMP POSITION]
You can adjust the optimal point when the black part
of the image is blunt or it has turned green.
1) Press
to select [CLAMP
POSITION].
2) Press
or the <ENTER> button.
z
The [CLAMP POSITION] individual adjustment
screen is displayed.
3) Press
to adjust.
z
Adjustment value can be selected from 1 to
255.
z
Optimal value of clamp position adjustment
When the black part is blunt:
The point where bluntness of the black part
improves the most is the optimal value.
When the black part is green:
The point where the green part becomes black,
and the bluntness has improved is the optimal
value.
Note
z
[CLAMP POSITION] can be adjusted only when a
signal is input to the <COMPUTER 1 IN> terminal
or the <COMPUTER 2 IN> terminal.
z
Certain signals may not be adjustable.
[PICTURE] menu