Filter
Top Products
Setting up
ENGLISH - 17
Mounting on the desk or the shelf
Mount the supplied set legs to the interface box.
z
Mount the legs to the set leg screw holes at the bottom side of the interface box with the supplied set leg
screws (4 pcs). Securely tighten the screws.
6HWOHJV
Attention
z
When mounting the interface box on a table or on a shelf, always use the set legs. When buttons on the control
panel are pressed, the interface box may slip and cause a aw on the table or the shelf.
z
When inverting the interface box, pay close attention not to drop or tumble.
z
Mount the interface box without applying excessive force, so the buttons, indicators, and connecting terminals
do not get damaged.
z
Pay attention to tips of the screws at the bottom side of the interface box, for not to get hurt.
z
Be careful that the weights of the cables and the AC adaptors connected to the connecting terminals are not
applied on the interface box.
z
When using the interface box, do not place objects on the interface box. Be careful not to cover exhaust ports.
For heat release, leave 3 cm (1.2") or wider space at both sides of the interface box.