Filter
Top Products
Checking the image
ENGLISH - 25
Conrm the connections of the external device (
page 18) and the AC adaptor (
page 23) and then turn on
the power (
page 24). Select the projecting image, and conrm that the selected image is projected from the
projector.
Select the input signal
Select an input signal.
1) Turn on the external device.
z
Turn on the external devices such as a projector and a Blu-ray disc player.
z
Operation may be required at the external device side, depending on the connecting external device. Refer
to the operating instructions of the external devices.
2) Press the DIGITAL LINK button on the remote control of the projector or press the
input selection button of the projector body to select the DIGITAL LINK input.
z
The operation method may vary depending on the projector.
3) Press the <HDMI 1> button, the <HDMI 2> button, the <COMPUTER 1> button, the
<COMPUTER 2> button, the <S-VIDEO> button, or the <VIDEO> button on the control
panel of the interface box.
z
The image of the signal being input in the selected terminal is projected.
Attention
z
Images may not be projected properly depending on the external device, or Blu-ray disc or DVD to be played.
Set the [SYSTEM SELECTOR] (
page 30) of [PICTURE].
Checking the image