Panasonic ETYFB100G Cable Box User Manual


 
Specications
ENGLISH - 51
Model No. ET-YFB100G
Terminals
<COMPUTER 1 IN>/
<COMPUTER 2 IN>
terminal
2 set, high-density D-Sub 15 p (female)
RGB signals G: 0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
B,R: 0.7 V [p-p] 75 Ω
SYNC/HD/VD TTL, automatic positive/negative polarity compatible
YP
B
P
R
signals Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
<VIDEO IN> terminal 1 set, pin jack 1.0 V [p-p] 75 Ω
<S-VIDEO IN>
terminal
1 set, Mini DIN 4 p Y 1.0 V [p-p], C 0.286 V [p-p] 75 Ω S1 signal compatible
<HDMI IN 1>/<HDMI
IN 2> terminal
2 set, HDMI 19 pin, (HDCP, Deep Color compatible)
Sound signal: Linear PCM (sampling frequency: 48 kHz/44.1 kHz/32 kHz)
525p (480p), 625p (576p), 750 (720)/60p, 750 (720)/50p, 1125 (1080)/60i, 1125 (1080)/50i,
1125 (1080)/60p, 1125 (1080)/50p, 1125 (1080)/24p, 1125 (1080)/25p, 1125 (1080)/30p
z
Displayable resolution: VGA (640 x 480 dot) to WUXGA (1 920 x 1 200 dot)
<SERIAL IN>
terminal
1 set, D-Sub 9 p, for external control (RS-232C compatible)
<AUDIO IN> terminal 1 set, M3 stereo mini jack, 0.5 V [rms], input impedance 22 kΩ or higher
<AUDIO OUT>
terminal
1 set, M3 stereo mini jack (variable)
0 V [rms] to 2.0 V [rms], output impedance 2.2 kΩ or lower
<LAN> terminal 1 set, RJ-45 network connection, PJLink compatible, 10Base-T/100Base-TX
<DIGITAL LINK>
terminal
1 set, RJ-45 for DIGITAL LINK connection
<REMOTE IN>
terminal
1 set, D-Sub 9 p for external control
Dimensions
Width: 210 mm (8-9/32")
Height: 44 mm (1-23/32")
Depth: 250 mm (9-27/32")
(projecting section excluded)
Weight
*2
Approx. 1.15 k
g
(2.5 lbs) (main body)
Approx. 0.20 k
g
(0.4 lbs) (AC adaptor)
Operating environment
Operating environment temperature: 0°C (32°F) to 40°C (104°F)
Operating environment humidity: 20% to 80% (no condensation)
*1: For the types of image signals that can be used with the interface box, refer to “List of compatible signals” (
page 48).
*2: Accessories such as the power cord and mounting brackets are not included.