Filter
Top Products
- 113 -
You can dub by connecting an AV cable.
≥ Be sure to use a sufficiently charged battery.
≥ Connecting the AV cable in the wrong direction may cause damage to
the USB/AV connector of the unit. If the connector has become
damaged, it may not operate correctly, including failure to recognize
the cable even if it has been connected.
≥ Images are dubbed in standard quality.
≥ Set to Playback Mode. (l 22)
1 Connect the unit to the recording equipment and
begin playback on the unit.
≥ Recorded files can be dubbed while a slideshow is being played back.
(l 89)
≥ If the unit is connected to a video device using an AV cable, the screen
of the unit will not display images when in Playback Mode. Check on
the TV screen instead.
Copy/Dubbing
Dubbing images onto other video
devices
Change the video input on
the video device and TV
that this unit is connected
to.
≥ The channel set will differ
depending on the terminal to
which the unit is connected.
≥ See the operating instructions
of the video device for details.
≥ Insert the plugs as far as they
will go.
≥ Do not use any other AV cables
except the supplied one.
A AV cable (supplied)