Filter
Top Products
- 97 -
3 Specify the starting position for the
scene.
≥ Play back to near the position where you
wish the scene to start, then pause
playback and specify the starting position
precisely using Frame-by-Frame
Playback. The pause position will be the starting position of the scene.
≥ If you wish the split scene to start from the beginning of the scene, go
to Step 4.
Operations
4 Tilt the SET button up.
≥ The screen for specifying the end position of the scene appears.
5 Specify the end position for the scene.
≥ Set the end position by performing the same operations as when
setting the start position.
≥ The portions displayed in green are saved.
≥ If you wish to splice a preceding section to
a subsequent section, tilt the SET button
down. Each downward tilt of the SET
button changes the section to be deleted.
6 Press the button or the
recording start/stop button.
Play back With the unit paused, tilt the SET button to the
right for approximately 2 seconds to play back
normally, and to the left to play back in the
reverse direction.
Pause During playback, press the SET button.
Fast forward/
fast-rewind
During playback, you can change the playback
speed by tilting the SET button right or left.
Frame-by-frame With the unit paused, tilt the SET button to the
right to advance frame-by-frame, and to the left
to reverse frame-by-frame.