Panasonic HX-DC3 DVR User Manual


 
- 21 -
If the unit has not been operated for approximately 5 minutes (settings
at the time of purchase) when the power is turned on, the ECONOMY
function will activate and switch to Standby Mode to limit power
consumption in situations such as the user forgetting to turn the unit
off.
jWhen the unit is in Standby Mode, you can turn on the unit by
pressing the power button.
jThe time until the unit goes into Standby Mode can be changed.
(l 47)
About the high temperature warning icon
If the battery temperature or unit internal temperature (excluding battery) rises,
the high temperature warning icon will provide warning as indicated below.
A High temperature
When you turn off the unit while the temperature is high ( is
lighting), you will not be able to turn on the unit again until the
temperature lowers. ( will flash.)
Battery/unit
internal
temperature
Screen
display
Unit operation
(Lighting)
Although it is possible to record/play
back, please stop using the unit as
soon as possible and turn off the
unit.
Motion picture recording is no longer
possible. (If you are recording a
motion picture, the recording stops.)
Please turn off the unit.
(Flashing)
After the flashing of the , the
unit turns off automatically. The unit
does not turn on when the
temperature drops. ( flashes.)
Wait for the temperature to drop
before using the unit again.