Filter
Top Products
- 51 -
≥ In the case of the built-in memory, when [FILE NO. CONT’D] is set to
[ON] the file numbers can be given consecutive in the same way as
when the card is used.
When [FILE NO. CONT’D] is set to [ON] and there are files remaining
on the newly inserted card, the files subsequently recorded on the
card will be numbered as described below.
When the newly inserted card contains file numbers which are
smaller than the file numbers recorded before changing the
cards
The numbering continues from the file currently being recorded.
Example:
If you record files up to 0015 on a first card and then exchange the
first card for a second card, which already has files up to 0005
recorded on it, the new file numbers on the second card will start from
0016.
When the newly inserted card contains file numbers which are
larger than the file numbers recorded before changing the cards
The file number will be consecutive to the last file number recorded on
the second card.
Example:
If you record files up to 0005 on a first card and then exchange the
first card for a second card, which already has files up to 0015
recorded on it, the new file numbers on the second card will start from
0016.