Filter
Top Products
Precautions for use
16 - ENGLISH
Important
Information
■
Do not use the projector tilted to the right or left
Using the projector at a vertical angle that exceeds 15° may reduce product life or result in malfunction.
■
When installing and using the projector at an angle that exceeds 30°
vertically, set [COOLING CONDITION] (
page 100).
Failure to observe this will result in malfunctions or shorten the life of the lamp or other components.
■
Cautions when setting up the projector
z
When installing and using the projector with a method other than the oor standing installation using the
adjustable feet, x the projector using the six screw holes for ceiling mounting (see the gure below). (Screw
diameter: M6, tapping depth inside the set: 30 mm (1-3/16"), torque: 4 ± 0.5 N·m)
110
(4-11/32")
145
(5-23/32")
48
(1-7/8")
298 (11-23/32")
548 (21-9/16")
25 mm (31/32")
12 mm (15/32")
12 mm (15/32")
30 mm (1-3/16")
30 mm (1-3/16")
110
(4-11/32")
135.5
(5-11/32")
145
(5-23/32")
110
(4-11/32")
M6
M6
Bottom view
Model No. of ceiling mount bracket: ET-PKD510H (for high ceilings)
ET-PKD510S (for low ceilings)
Torque: 4 ± 0.5 N·m
Screw holes for ceiling mount
Screw hole depthMax. screw hole depth
Max. screw hole depth
Embedded nut
(Screw hole depth)
Space
Unit: mm