Filter
Top Products
[DISPLAY OPTION] menu
88 - ENGLISH
Settings
Select [DISPLAY OPTION] from the main menu,
and select the item from the sub-menu.
Refer to “Navigating through the menu”
(
page 61) for the operation of the menu
screen.
z
After selecting the item, press
to set.
[COLOR MATCHING]
You can correct the color difference between the sets
when multiple sets are to be used simultaneously.
1) Press
to select [COLOR
MATCHING].
2) Press
to switch [COLOR
MATCHING].
z
The setting will change as follows each time
you press the button.
[OFF] [3COLORS] [7COLORS]
[MEASURED]
[709MODE]
[OFF]
Color matching adjustment is not
carried out.
[3COLORS]
The three colors [RED], [GREEN],
and [BLUE] can be adjusted.
[7COLORS]
The seven colors [RED], [GREEN],
[BLUE], [CYAN], [MAGENTA],
[YELLOW], and [WHITE] can be
adjusted.
[709MODE] Refer to “To use a colorimeter to
adjust the color matching” (
page 89)
for details about this mode.
[MEASURED]
■
To set [3COLORS] or [7COLORS]
3) Select [3COLORS] or [7COLORS] in
Step 2).
4) Press the <ENTER> button.
z
The [3COLORS] or [7COLORS] screen is
displayed.
5) Press
to select [RED], [GREEN],
and [BLUE] (for [7COLORS]: [RED],
[GREEN], [BLUE], [CYAN], [MAGENTA],
[YELLOW], and [WHITE]).
6) Press the <ENTER> button
z
The [3COLORS:RED], [3COLORS:GREEN] or
[3COLORS:BLUE] screen is displayed.
For [7COLORS], the [7COLORS:RED],
[7COLORS:GREEN], [7COLORS:BLUE],
[7COLORS:CYAN], [7COLORS:MAGENTA],
[7COLORS:YELLOW] or [7COLORS:WHITE]
screen is displayed.
z
Set [AUTO TESTPATTERN] to [ON] to display
a test pattern of selected colors.
7) Press
to adjust the level.
z
Adjustment value will change between 0 and
2 048.
Note
z
Operation when correcting the adjustment color
When the adjustment color and the same correction
color are moved: The luminance of the adjustment
color will change.
When correction color red is changed: Red is
added to or subtracted from the adjustment color.
When correction color green is changed: Green is
added to or subtracted from the adjustment color.
When correction color blue is changed: Blue is
added to or subtracted from the adjustment color.
z
This adjustment should be carried out by a person
who is familiar with the projector or by a service
person because a high level of skill is required to
make a successful adjustment.
z
Pressing the <DEFAULT> button will restore the
factory default settings for all items.
z
When [COLOR MATCHING] adjustment has been
set to any setting other than [OFF], the [COLOR
TEMPERATURE] is xed to [USER1].
z
Set [3D COLOR MATCHING] (
page 84) to set
whether 2D and 3D signals are set separately or
whether common data is used. (PT-DZ21KE and
PT-DS20KE only)
z
When 2D and 3D settings are set separately,
[NATIVE] or [3D] is displayed in the upper right of
the menu. (PT-DZ21KE and PT-DS20KE only)
[DISPLAY OPTION] menu