Panasonic PT-DS20KE Home Theater Screen User Manual


 
[3D SETTINGS] menu (PT-DZ21KE and PT-DS20KE only)
86 - ENGLISH
Settings
[3D FRAME DELAY]
Adjust the timing of the left-right switch of an image.
1) Press

to select [3D FRAME
DELAY].
2) Press
󱚣󱚤
to switch [3D FRAME
DELAY].
z
Values in the following range change by units of
10 us.
0 us to 25 000 us
[3D TEST MODE]
Set the image display format for use with 3D system
adjustments.
1) Press

to select [3D TEST MODE].
2) Press
󱚣󱚤
to switch [3D TEST MODE].
z
The setting will change as follows each time
you press the button.
[NORMAL]
[SIDE BY
SIDE]
[LEFT/LEFT]
[BLACK/
RIGHT]
[LEFT/
BLACK]
[RIGHT/
RIGHT]
[NORMAL] Standard setting.
[SIDE BY SIDE]
The left eye image is displayed
on the left, next to the right eye
image displayed on the right.
[LEFT/LEFT]
Both the left eye image and right
eye image display the left eye
input signal.
[RIGHT/RIGHT]
Both the left eye image and right
eye image display the right eye
input signal.
[LEFT/BLACK]
The left eye input signal is
displayed in the left eye image
and a completely black image is
displayed in the right eye image.
[BLACK/RIGHT]
A completely black image is
displayed in the left eye image
and the right input signal is
displayed in the right eye image.
Note
z
The [3D TEST MODE] settings return to [NORMAL]
when the projector is switched off.
z
This is disabled when [3D SYSTEM SETTING] is
set to any setting other than [SINGLE].
z
This is disabled when [3D TEST PATTERN] is
displayed.
[3D TEST PATTERN]
The 3D test pattern can be used to check operation
and make adjustments even without a 3D signal.
1) Press

to select [3D TEST
PATTERN].
2) Press
󱚣󱚤
to switch [3D TEST
PATTERN].
z
The setting will change as follows each time
you press the button.
Menu screen
+
Entry screen
Menu screen
+
Left: white/
Right: black
Menu screen
+
Left: black/
Right: white
Note
z
The 3D test pattern cannot be displayed when the
following inputs are selected.

VIDEO input

RGB1 input (only when [RGB IN] is set to [Y/C])
z
This is disabled when [3D SYSTEM SETTING] is
set to any setting other than [SINGLE].