Filter
Top Products
DRM-7000 Operating Instructions
• 20-Disc Hyper Magazine Dust Cover
• Operating Instructions
• Warranty Information
• Service Network Sheet
2.8 Add-On Products
The following components may be purchased separately for use with the Pioneer DRM-7000
Changer.
• 50-Disc Locking Magazine (DRM-AL751)
This magazine is designed to maximize security. The locking mechanism prevents
removing a disc from a magazine through commands to the Changer. Use the Mail
Slot to add or exchange discs in this magazine.
• 50-Disc Magazine (DRM-AF751)
Fitted with a knob which releases the locking mechanism, this magazine makes it
possible to exchange discs between different magazines with commands sent to the
Changer.
• 20-Disc Hyper Magazine (DRM-AH721)
A single 20-disc magazine may be installed and removed without opening an access
panel. The lock, located on the exterior of the changer, is equipped with a memory
system that records all user operations. Additional hyper magazines may be
purchased in order to build an offline-library in 20-disc units.
• DVD-R/RW Drive (DVD-R7322)
The internal DVD-R/RW and CD-R drive may be used to read or write DVD/CD discs.
• DVD-ROM Drive (DVD-D7563)
The internal DVR drive may be used to read DVD and CD discs.
• Disc Flip Unit (DRM-UF701)
The disc-turning unit is designed for use of double-sided DVD discs within the
Changer.
• Power Supply (DRM-PW701)
The add-on power supply works in conjunction with the upper bays (bay 9 through bay
16).
• Multi-Drive Connector (DRM-SN721)
The DRM-SN721 is an internal daisy-chain board with a cable to connect two internal
drives. The board may be used to connect two or four additional drives in a daisy-
chain.
• Single-Drive Connector (DRM-SN711)
The DRM-SN711 is a board used to connect a drive directly to the HOST computer
system or when a series of drives are daisy-chained outside of the Changer.
• Cable for Two Drives (DRM-SC721)
The two-drive SCSI cable is used to create a two-drive SCSI chain. When used in
conjunction with the internal daisy-chain board, it is possible to connect up to four
internal drives.
• Cable for Four Drives (DRM-SC741)
The four-drive SCSI cable is used to create a four-drive SCSI chain. When used in
- 6 -