Filter
Top Products
DRM-7000 Operating Instructions
If the controller software does not support multiple import/export elements, set
the Hyper I/E mode to OFF.
5.2.3.6 Auto Eject
Changers installed within a network are often located in a different room or
possibly another building. If a disc or a hyper magazine is ejected while an
attendant is away from the Changer, it is possible for unauthorized personnel
to remove the media from the mail slot or the magazine from the hyper bay.
To maintain security, the Auto Eject command can be turned OFF thus sealing
a disc or a hyper magazine within the DRM-7000 Chassis.
To turn off the Auto Eject function, follow the steps below.
Auto eject?
Press the Enter button
Auto eject is
set to ON / OFF
Press the right arrow button
Auto eject is
set to ON / OFF
Press the Enter button
Auto eject
is prohibited
When the Auto Eject function is set to ON, the following message appears:
Auto eject
is activated
If the Auto Eject command is set to OFF when the host computer issues an
Eject Disc command, the media is moved to the mail slot tray but the tray
remains closed. The following message appears on the LCD display.
Press ENT-key
to open mail slot
On the Changer, turn the Administrator key to the unlocked position. Press the
Enter button to open the mail slot tray.
- 29 -