Filter
Top Products
DRM-7000 Operating Instructions
Information submodes enable a System Administrator to check a Changer’s current settings or
read the stored data. The System Administrator may also view a variety of Changer
information without interfering with the control of the Changer from the host computer.
Operation submodes allow movement to the disc changing or magazine ejection mechanisms,
disc replacement, and slot availability checks. Operation Submodes cause the Changer to
ignore commands issued from the host computer.
5.2.1 Inquiry Submode
The Inquiry Submode displays general information about the DRM-7000 system.
Issuing a SCSI INQUIRY command from the host computer provides the same
information about the Changer. The data includes SCSI IDs and the unit’s serial
number.
The first screen shows the Changer’s SCSI ID number.
(Inquiry) ID = 5
Revision *.***
Pressing the Enter button causes the unit’s model name and serial number to appear
on the LCD display.
DRM-7000
Serial = ********
Pressing the Escape button causes the display to return to the previous message.
To alter the Changer’s SCSI ID, refer to the earlier section in this manual entitled,
Changing the SCSI ID for a DRM-7000.
5.2.2 Config Submode
The Config Submode provides component installation checks. The components include
all magazines and devices in both front and rear bays.
(Config)
Setup browser
Pressing the Enter button reveals the SELECT BAY screen. Use the up and down
arrows to select the appropriate bay.
Magazine – bay or
Rear (drive) – bay?
Example of Rear Bay selection:
Press the Enter button again to reveal the component currently inserted in the rear
drive bay #1.
Bay # 1 = Drive 1
DVDROM DVD-D7361
- 22 -