Filter
Top Products
DRM-7000 Operating Instructions
Magazine – bay or
Rear (drive) – bay?
Press the Escape button
(Config)
Setup browser
Press the Escape button
(Inquiry) ID = 5
Revision * . ***
Press the Escape button
Front-door :Close
Rear-door :Open
Close the rear access panel
Initializing
Initialization complete
Robotics ready
Drive1 no disc
For additional instructions from this point forward, refer to your Controller software
documentation.
Note: Restart the host computer to recognize new and exchanged devices.
6.2 Exchanging Drives
The procedure to exchange drives is similar to adding drives described in the previous section.
However, use the drive exchange command to eliminate possible bay and ID assignment
errors.
Note: It is best to duplicate the existing drive’s SCSI ID and termination switch settings to the new
drive.
1. Enter the System Administrator.
2. Enter the Door submode to open the rear access panel.
The following message appears on the LCD display:
Front-door :Close
Rear-door :Open
3. Return to the System Administrator mode.
- 43 -