Filter
Top Products
DRM-7000 Operating Instructions
5. Remove the magazine by flipping the handle out and pulling the unit towards
you. Support the magazine so that it remains level as it slides off of the rails.
4.6.2 Inserting Discs Using a 20-Disc Hyper-Magazine
Follow the directions below to insert discs in to a hyper-magazine then add the
magazine to the Changer.
1. Turn the magazine’s release knob (vertical position) to unlock the slots.
2. Insert discs horizontally with the labels facing up.
3. Turn the release knob to the horizontal position locking the discs into the slots.
Note: Turning the magazine upside-down with the locking mechanism disengaged may
result in damage to the discs.
4. Insert the hyper-magazine into the top bay above the front access door.
* Once the magazine is inserted approximately half way into this bay,
the changer automatically pulls the unit forward until it is locked in place.
The Changer automatically reads the magazine ID and lists the information on the LCD
display a few seconds after a successful magazine insertion.
M1 Locked – type
ID = * * * * * * * * * * * *
- 17 -