Filter
Top Products
DRM-7000 Operating Instructions
To exit this mode without inserting a hyper magazine, press the Escape key
three times to return to the User mode.
To replace a hyper magazine, eject the current hyper magazine according to
the preceding instructions then partially insert the new hyper magazine. The
changer automatically senses and draws in the magazine. Never force a
magazine into a bay. The following message appears on the LCD display
when a hyper magazine is inserted properly.
Hyper – magazine
is loading
When a hyper magazine is loaded, a unique ID and a log of the magazine’s
locking mechanism usage appears on the LCD display.
If the usage log is empty, the following message appears:
Locked – state
ID # ************
If the usage log includes data, the following message appears:
Uncertain – state
ID # ************
The magazine is automatically ejected if the Changer is unable to read the ID.
Reinsert the magazine to attempt to read the ID again.
5.2.7 Probe Submode
The Probe submode checks for discs within slots when a magazine is loaded while
outside of the Changer. Usually the controller software performs this task but if the
changer is not connected to a host computer, this submode issues a check for discs
within a magazine’s slots. Use the Probe submode if the controller program fails to
offer this option.
(Probe)
Slot initialization
Press the Enter button to scroll in sequence through the bays containing magazines.
Initialize
slots of M1?
Press the Up Arrow or Down Arrow button to scroll to a magazine then press the
Enter button to select the magazine. The DRM-7000 automatically scans the
magazine slots in sequence for discs.
M1 – 01
. . . . . .
- 37 -