Filter
Top Products
DRM-7000 Operating Instructions
To change the selected bay, use the up and down arrow buttons.
Example:
arrow button
Bay # 5 & # 6
flip unit
arrow button
Bay # 9
no component
arrow button
Bay # 15 & # 16
ID = ************
If the bay holds a drive, press Enter to display the SCSI ID, the termination switch
setting and the device ID of the drive.
scsi ID = 1 TermOFF
dev – ID = ********
If a disc is inserted in the drive, press Enter to display the disc number.
Disc in Drive 1
is # *** (M** – **)
Note: Pressing the Escape button causes the screen to return to the previous view. Each time
this button is pressed, the display backs up by one screen.
To view drive information, press the Escape button to return to BAY SELECTION and
choose the appropriate rear bay.
Example of Hyper Magazine Bay selection:
Press the Enter button to reveal the hyper magazine ID.
Hyper magazine
ID = ************
If the hyper magazine bay is empty, the following message appears on the display:
Hyper magazine
removed
Hyper magazines include a memory system that keeps a record of each time the
release locking mechanism unlocks the magazine. Pressing the Enter button while a
hyper magazine is installed causes these records to appear on the LCD display.
- 23 -