Filter
Top Products
DRM-7000 Operating Instructions
Similarly, a command from the host computer to eject a hyper magazine while
Auto Eject is set to OFF results in the following message.
Press ENT-key
to eject hyper
Use the Administrator key to Unlock the Changer and remove the hyper
magazine.
5.2.3.7 Hot Start
If discs are left in the drives when the power to the Changer is turned OFF then
ON, the discs are automatically returned to their original slots. This operation
fails to activate after a SCSI reset.
Before selecting the Hot Start function, choose the disc or discs that must
remain in the drives. Activate the Hot Start command to retain frequently used
discs in the drives upon powering ON the DRM-7000.
Hot start?
Press the Enter button
Hot start is
set to ON / OFF
Press the left arrow button
Hot start is
set to ON / OFF
Press the Enter button
Hot start
is activated
When the Hot Start function is set to OFF, the following message appears:
Hot start
is prohibited
Note: Unless the controller software allows discs to remain in the drives when powering
up the system, a Hot Start is unavailable.
- 30 -