Filter
Top Products
Chapter 1: Before You Begin
Chapter 1 9
Docking Station (Back view)
LINE OUT jack – Attach the line out cable here when you’re connecting the Lyra Recorder to
an audio/video input component, such as a stereo receiver, TV, VCR, set-top box, or camcorder.
LINE IN jack – Attach the line in cable here when you’re connecting the Lyra Recorder to an
audio/video output component, such as a stereo receiver, TV, VCR, or camcorder.
DC IN jack – Plug in the AC power adapter here. When you plug in the AC adapter, the Lyra
Recorder’s battery automatically starts charging.
IR jack – Attach the IR blaster here in order to control your VCR, cable box, satellite receiver,
etc. for timer recordings.
USB jack – Attaches to your computer or other USB host device. Attach the small end plug
(Type mini-B) on the USB cable. Attach the large end (Type A) to your computer.
IR DC IN IN OUT LINE
-
-
LINE OUT
jack
LINE IN
jack
DC IN
jack
IR
jack
USB Adapter
Use the USB Adapter cable to connect USB Drives (Flash, Thumb Drives) to your Lyra Recorder to
manage content stored on these devices (NOTE: Not all USB Drives may be able to be recognized
by the Lyra Recorder). After connecting the USB drive to your Lyra Recorder via the provided USB
Adapter cable, select Files from the main menu of the Lyra Recorder. An item labeled “USB Device”
will be displayed in the left side of the Files screen, if the Lyra Recorder successfully recognized your
drive. You can browse the folders and files stored on the drive, copy folders or files over to the hard
drive of the Lyra Recorder from the drive or view/play supported media files directly from your USB
drive.
NO
RMAL
CO
NT
RO
L
S
H
OL
D
TV
O
U
T
Note: Remove Battery from packaging
and install as shown below. The
provided Li-ion battery needs to be
charged for at least 4 hours by the
supplied AC/DC adapter.
USB
jack