RCA X3000 DVD Recorder User Manual


 
Chapter 2: The Remote Control
Chapter 2 19
Button Descriptions for Other Components
The remote operates most brands of other components (VCRs, DVD players, satellite receivers, etc.). The following list provides basic information about
how these buttons operate in these modes.
Indicator Used to indicate status of remote control when programming it to operate other components. Also, indicates when batteries are low by
flickering when you press a button on the remote.
0-9 (Number buttons) Use the number buttons to input information in the menu system.
Arrow buttons (up, down, left, right) Use the arrow buttons to highlight options that appear on the screen (the arrow buttons move the highlight in the
corresponding directions — up arrow moves the highlight up; left arrow moves the highlight left, etc.).
Power Turns on and off compatible components.
AUX (Auxiliary) Puts the remote in auxiliary mode to operate a component (such as a cable box, VCR, DVD player, satellite receiver or audio receiver)
that you’ve programmed to work with this button.
BACK When watching TV, goes back to the previous channel.
CH + When watching TV, goes to the next channel in the channel list.
CH – When watching TV, goes to the previous channel in the channels list.
CLEAR Removes some on-screen menus and displays.
GUIDE Brings up the guide for your TV, if available.
INFO In TV or AUX mode, displays the on-screen Info Display.
MENU Accesses the main menu.
MUTE Lowers the volume to its minimum level. Press again to restore volume.
SUBTITLE Toggles the available subtitles for some compatible DVD players.
TV Puts the remote in TV mode in order for it to operate your TV. This remote is already programmed to operate RCA, GE, and Proscan brand TVs.
This remote is capable of being programmed to operate many brands of TVs.
VOL +/- If your remote is capable of operating your TV, increases and decreases the volume level. Does not control the Lyra Recorder’s volume, it must be
adjusted on the unit itself.