Filter
Top Products
19
OPERATION
3. PLAYING BACK VIDEOS
Follow the steps below to play back videos recorded on the
hard disk.
To end playback
Press the [ ] (CUE) or [ ] (REVIEW) button
during playback or when a still image is
displayed.
When you press the [ ]
(CUE) button, appears
in the operation display,
and the playback fast-
forwards at 2 times the
normal playback speed.
When you press the [ ]
(REVIEW) button,
appears in the operation
display, and the playback fast-rewinds at 2 times the
normal playback speed.
To change the fast-forward speed
Press the [ ] button while fast-forwarding.
Press the button once to increase the speed to 7.5 times
the playback speed, twice to increase the speed to 15
times the playback speed, 3 times to increase the speed to
30 times the playback speed, and 4 times to increase the
speed to 180 times the playback speed.
Playback
1
Press the [PLAY/STOP] button.
The [PLAY/STOP] button lights, and appears in
the operation display area. The videos recorded on
the hard disk are played back in the quad screen.
z Video playback starts from the point at which
recording started.
z If “OVER WRITE” has been set in the normal
recording settings, playback starts with the oldest
recorded video when the recording is played back
for the first time.
z When playback ends, the digital video recorder
pauses automatically.
The [STILL] button lights, and ( ) appears in the
operation display area.
z After playback is stopped, it will resume from the
stopped point the next time it is started.
z You can display quad screen images in single
screens. (P.13)
[PLAY/STOP] button
HI A
05-10-04 08: 30: 35
2
Press the [PLAY/STOP] button.
Playback ends.
Playing back a video near the point of
recording
The digital video recorder prioritizes recording
operations, so the playback image may pause
temporarily.
Fast-forwarding or rewinding during
playback
[ ] button
[ ] (CUE) button
[ ] button
[STILL] button
[ ] (REVIEW) button
X2 A
05-10-04 08: 30: 35
e00_VDH_M814.book Page 19 Thursday, October 28, 2004 9:59 AM