Filter
Top Products
SPECIFICATIONS
71
APPENDIX
(mm)
The fan is located below the space for the additional hard disk. When adding a hard disk, perform the following procedures to
ensure that the harnesses are not entangled in the fan.
Before installation
Unplug the fan connector and remove the fan harness from
the clamp.
During installation
After connecting the wire harness to the second hard disk,
secure each wire harness in place.
After installation
After installing the hard disk, secure its power harness in
place with the cord holder, and reattach the fan harness
and connector.
Dimensions
96
Front Side
Cautions when adding a hard disk
Connector
Clamp
Wire harness
Cord holder
Cord holder
Cord holder
e00_VDH_M814.book Page 71 Thursday, October 28, 2004 9:59 AM