Filter
Top Products
60
RS-485/NETWORK SET
SETTINGS
Settings
Settings ( indicates default setting.)
2
Select “7. RS-485/NETWORK SET”, and
press the [ ] button.
The <NETWORK SET> screen is displayed.
Item Description
(1) IP ADDRESS Displays the IP address that has been set.
(2)
ADVANCED
SETTING
Set whether to set IP address on digital video
recorder or on PC.
3
Press the [ ] or [ ] button to select
“ADVANCED SETTING” and press the
[ ] button.
The <NETWORK SET-ADVANCED> screen
appears.
The cursor moves to “ADDRESS SET”.
4
Press the [ ] button, then press the
[ ] or [ ] button to select “MANUAL”.
(1)
(2)
Setting Description
AUTO
When either the VA-SW814 Ver.2 or VA-SW81LITE
Ver.2 remote control software is used, the digital video
recorder’s [STILL] button can be pressed to have the IP
address set automatically.
MANUAL
The “DVR NAME”, “IP ADDRESS” and “SUB NET
MASK” are set on the digital video recorder.
5
Set “DVR NAME”, “IP ADDRESS”, and
“SUB NET MASK” using the [ ], [ ],
and [ ] buttons.
6
Press the [EXIT/OSD] button.
The display returns to the normal screen.
When a new IP address is set using the digital video
recorder, it will become valid upon leaving the
<RS-485/NETWORK/REMOTE SET> screen.
When connecting the digital video recorder to a
network, check the IP address with the network
administrator.
The set IP address is displayed in the <RS-485/
NETWORK/REMOTE SET> screen.
e00_VDH_M814.book Page 60 Thursday, October 28, 2004 9:59 AM