Filter
Top Products
SETTING THE LANGUAGE AND TIME
35
SETTINGS
Settings ( indicates default setting.)
When “USE” is selected for “MODE” under
<DAYLIGHT SAVING>
You can set the date and time at which the time is switched
from standard time to Daylight Saving time, and the date
and time at which the time is switched back again.
The example below is the default value.
Example:
After the clock display reaches April 4, 2004, 01:59, the
next clock display is 03:00, putting the clock an hour
ahead (Daylight Saving time).
After the clock display reaches October 31, 2004,
01:59, the next clock display is 01:00, putting the clock
an hour behind (back to standard time).
(1) Sets the week for switching to Daylight Saving time.
(2) Sets the day of the week.
(3) Sets the month.
(4) Sets the time.
(5) Sets the week for ending Daylight Saving time.
(6) Sets the day of the week.
(7) Sets the month.
(8) Sets the time.
3
Press the [ ] or [ ] button to select
“MODE” under <DAYLIGHT SAVING>.
4
Press the [ ] button.
“USE” flashes.
5
Press the [ ] or [ ] button to change
the setting.
Setting Description
USE
Time is automatically adjusted to
Daylight Saving time.
NO USE
Time is not automatically adjusted to
Daylight Saving time.
6
Press the [ ] button.
The cursor moves to the date time at which to switch
from standard time to Daylight Saving time.
7
Press the [ ] button.
The cursor moves to “1ST”.
8
Press the [ ] or [ ] button to select
the desired week, then press the [ ]
button.
(1) (3) (4)
(5) (7) (8)
(2)
(6)
e00_VDH_M814.book Page 35 Thursday, October 28, 2004 9:59 AM