Filter
Top Products
4
The signal processing capabilities of the Image Processor ensure
optimum reproduction of a broad range of input signals, from in-
terlaced video to high definition and graphics.
Conversion of interlaced video signals to progressive signals by
means of prestigious DCDi™ technology produces fluid, natural
images free of artifacts such as flicker and stairstepping on diago
-
nals.
Faithful reproduction of signals at higher resolutions (such as high
definition video and graphics) occurs without loss of information or
reduction of image sharpness thanks to the processor’s high pixel
rate signal acquisition capabilities.
In addition, the specific type of signal processing makes it possible to
eliminate the swirl effects that can sometimes mar the performance
of LCD screens when displaying moving images.
All image adjustments can be performed from the remote control
with the aid of the On Screen Display; alternatively, the unit can be
controlled by from a home automation system through the serial
port.
Besides the usual checks, the Quality Control department
also runs additional statistical tests before shipment.
Therefore the packing may show signs of having been
opened.
The new HTL40 LINK flat screen offers the ideal combination
between top TFT-LCD technology and an expert system for digital
processing of video signals.
Your HTL40 LINK system is composed of two refined and elegant
units. The 40’’ screen reflects the state of the art of TFT-LCD tech
-
nology, with 1366x768 pixel resolution and the ability to display
up to 16.7 million colours. The DigiOpticTM Image Processor
video signal processing unit assures the acquisition of a very broad
range of different video signals, while simultaneously providing the
processing power needed to produce sharp, detailed pictures with
bright natural colours.
The two units are interconnected by means of a single cable con
-
taining three fibre optic cores. The fibre optic cores allow the digital
signal to be transmitted from the DigiOptic™ Image Processor to the
screen and control signals to be transmitted in both directions.
Thanks to the flexibility and reduced diameter of the fibre optic cable,
the two units can be sited in the room in a totally independent man-
ner (distances of up to 500 metres), thereby ensuring that they will
fit perfectly into the layout of your home theatre room.
A very broad range of different video signals can be connected to
the DigiOptic™ Image Processor, which, since it is separate from the
screen, can be placed anywhere in your room without detracting
from the elegant styling and clean lines of the screen unit.
The large number of inputs available on the DigiOptic™ Image
Processor (2 Composite Video inputs, 2 S-Video inputs, up to 4
Component or RGB inputs, 2 graphic RGB inputs, 1 DVI-D input,
1 HDMI™ input), ensures the system supports and processes a
wide range of video signals from various sources: DVD players,
VCRs, satellite and terrestrial receivers, computers, game consoles,
video cameras, etc.
DCDi is a registered trademark of Faroudja, a division of Genesis Microchip, Inc.
DigiOptic™ is a registered trademark of SIM2.
HDMI, the HDMI logo and the expression High-Definition Multimedia Interface are trade marks or registered marks of HDMI licensing
LLC