Filter
Top Products
5
CAUTION!
To reduce the risk of electric shock, disconnect the power supply cable on the rear panel before
removing the cover of the screen.
For technical assistance refer to trained personnel authorised by the manufacturer.
Read all chapters of this manual carefully before switching on the screen This manual provides basic instructions for
using the HTL40 LINK system. Installation, preliminary adjustments and procedures that necessitate opening the units
and touching electrical components must be carried out by authorised, trained technicians. To ensure safe and long
term reliability use exclusively the power cables supplied by the manufacturer. Observe all warnings and cautions.
This symbol indicates the possible electric shock
hazard associated with uninsulated live components
inside the unit.
2 IMPORTANT SAFETY INSTRUCTIONS
This symbol indicates the presence of important
instructions regarding use and maintenance of
the product.
The HTL40 LINK system consists of two parts connected by a fibre optic cable: the DigiOptic™ Image Processor and the screen. In this
manual references to the DigiOptic™ Image Processor unit and to the screen unit refer to the two units that make up the system.
LAMP WARNING
If the lamp should suddenly burst with a loud bang, air the room thoroughly before using it.
Do not change the lamp: seek qualified technical assistance from your nearest Dealer.
CLASS 1 LASER PRODUCT
This product complies with FDA radiation performance standards, 21 see chapter 1 subchapter j.
This product complies with European standard EN 60825.
This product is classified as a class 1 laser product and it does not emit hazardous levels of radiation assuming the safety protections are
in place.
Caution! invisible laser beam when the product is open.
Avoid direct exposure to the laser beam.
To avoid exposure to visible or invisible laser radiation do not open product cover panels and do not touch internal parts.